VAG K+Can cable cant be used with DDT2000
use vag 409 cable
Hello,
I hope that someone will have experience with DDT2000 Renault Diagnostics and might be able to help me out.
I have installed version 2.9.0.4. It runs OK it sees my VAG K+Can cable but it does not connect to the cars. I have tried with one Clio 1.2 16V 2001 model and one Kangoo similar model. It does not come up with any error either. Any ideas please?
Thank You for Your time!
Knowledge is to share... so if I have helped just press [Thank You + Rep.]...
VAG K+Can cable cant be used with DDT2000
use vag 409 cable
speedy100 (21st March, 2015)
HI!
drivers are compatible?
you can do tutorial?
sorry for my English
thx
@ ammarben and flixuno : Thank You for Your reply guys!
I do not have vag 409. I will try VAG KKL and see...
Tutorial I do not know how to do.
Best Regards
Knowledge is to share... so if I have helped just press [Thank You + Rep.]...
Col19 (27th October, 2019)
hi!
I'll try to make tutorial
speedy100 (15th March, 2015)
Hello friends, I will ask again your help . I have a ddt2000 working program with a mdb database and when i try to read e Logan ecu from 2006 i have this error: ecu refused to unlocked . Please explaine me why .
Thanks!
Yes it can!!!
These guys managed it too.
http://ddt2000.pl/instalacja-program...sp3-pl-32-bit/
speedy100 (25th March, 2015)
speedy100 (25th March, 2015)
Knowledge is to share... so if I have helped just press [Thank You + Rep.]...
Driver issues. Does ddt see the com port you're using? Are you using admin privileges? Are you running in compatibillity mode?
I see you are using 2.9.0.4. Windows7 or 8 by any chance?
speedy100 (26th March, 2015)
Taking a guess then you need to alter driver .ini file to give a 10400 baudrate then once done that if not working try 2ms latency tme.
Last edited by JustMeAgain; 28th March, 2015 at 04:48 PM.
speedy100 (26th March, 2015)
Bookmarks