amor89 (22nd June, 2019), angelx431 (6th November, 2016), artur12 (8th February, 2018), bokilee (30th June, 2018), eric paris (16th May, 2017), fabrag (29th January, 2019), fellowes20 (12th November, 2018), laki23 (14th November, 2017), luiggii79 (11th November, 2017), mexanico1971 (18th June, 2019), motocarlos (16th February, 2018), psyche (26th June, 2020), redful (23rd January, 2022), ruicosta (10th December, 2020), uncle_sem (2nd July, 2018), zxc11 (20th July, 2022)
Anyone here selling this tool to work 100% with all software?
Guys im attaching pdf with mirrored pcb generated from gerber file. iaw decoder.pdf
badfree (7th May, 2020), fabrag (29th January, 2019), linu (6th November, 2020), motocarlos (16th February, 2018), paolo poppi (12th September, 2018), yellowstilo (23rd September, 2017)
Hi i'am actually try to do this iaw decoder with the gerber file (given so thanks for that) and i just want to be sure that the size is good.
the size i got is 78,5 x 50 (mm) for the pcb do you think the size match ?
Thanks for answer and thanks for the iaw59f file.
If sombody need professional device i can offer very good price .
Sent from my iPhone using Tapatalk
Hi everyone and thanks for help read through this forum so great....
Just want to say that my decoder is finish and in good functional order.
I have just read an old iaw59f.m3 100% finish to read and i will try another test with this decoder like virgin and immo off.
It is made with the files from "otocheck" download here.
So if i can help someone i will.....with my little competence .
My pcb is not so beautiful made like the Mikroel one cause i don't have a mini drill and it is the first time i have solder smd (cms component) and the first time i made a pic and a ft232rl functional and solder.
But it is possible to realize this tool even if we are newbie like me.
SO thanks again,try and succeed because of this forum help me to keep confidence in myself.....the more important than the project i think.
Thanks.
mikroel
Please help me cause i have done already two ecu virginised one M3 become an M2 (for my punto) and the other M2 virginised but one problem with the last one (3) cause the software seems to be missing "programma 00000" and cannot know how rebuild file missing?
And i see that one ground pin is missing on this ecu the pin 10 (ground) but now nothing just one ground (pin 33) usually there is two ground in iaw59f (10 and 33) so may be this ecu i bought 41 euros gone to the rubbish!
Could i be able to rebuild the program missing.
In the software (mtuning) the ecu in read and the software say: "ID CENTRALINA IAW59F HWM2 PROGRAMMA 00000" so there is no program inside how it can be ??
But know i want to repair this iaw59f ecu to rebuild file missing i don't know how?
Please could you help me
i
My pcb solder but i don't have any drill!
And the problem with my last bought (iaw59f.m2) with no program inside!DSCN5791.JPGDSCN5788.JPGDSCN5787.JPG
There is no answer so i'm answer to myself.....and for the other who have this "problem"
Just to say that with the ecu iaw59f.M2 there is no number of program when the ecu is read in the software given by OTOCHECK.
The first two software: tuning2 and 59f can read this ecu but the third one
IAW 59F 5AF 5SF DECODER cannot read it.he can just virginised the ecu.
That just i know best regards for everyone.
It is working good with yaw59f hw under 100. I made virgin and immo off.
On hw303 it does not work. It says that it is making virgin, but it is not doing anything.
At least mine it is like that.
https://youtu.be/acMKyuHKO7I
Sent from my iPhone using Tapatalk
Hi have this project working, but the software dont recognize serial number from interface. Someone can help?
Bookmarks