59F decoder tool open project with hex files

[fanos]

The case is too much. The DB 9 is not RS232 port. Inside?

[tarabostesul]

For those who wish, price in PM

is works very well..test hw103 and hw303 and everything OK

[fiat675]

Im going to build this hw and after reading the thread i still have a question.

Is the software in the package able to read and write the full rom to tune maybe or if it is just a decoder?
I'm looking for ways to tune these ecus.
I know its the immo forum and the decoding is fine this is all looking great.
looking for definition files and there are some for ducatti 5af maybe some of you know whats the difference.

[filaalfa28]

Hi fiat675 this 59f decoder can virgin iaw59f M2,M3,M7,M1....but it can transform an iaw59f to another iaw59f.
For example,If you bought an used iaw59f from a Fiat Seicento (iaw59fM1) and you want to put it to your punto 60 elx (iaw59M3) you can do it without any problem.
I have done it and my Punto 1999 is running with an iaw59fM3 instead of an iaw59fM2.
So if your question about tuning is transform an iaw59f to be compatible with another car it is possible,but just for this type of ecu.
Just the family of IAW59F ECU.
Best regards.

[milzal]

China still have not decoder for sale ? Strange.

[mikroel]

The case is too much. The DB 9 is not RS232 port. Inside?

Inside is this .
Professional pcb




Sent from my iPhone using Tapatalk

[filaalfa28]

China still have not decoder for sale ? Strange.

Strange,i don't think so.....
Have you ever think about the market of an 59f decoder ?
Fiat punto,seicento,lancia y and ducati bike....

I think you will never be rich selling this decoder it is why Chinese market is not interest in build and selling that type of product the market is so so little....

[mikroel]

Supported Models:
59FM2
59FM3
59FM5
59FM7
59FM9
5AM DUCATI**
5AFP3
5AFP4
59M
5SF
• IAW Marelli 59F - HW ver < 100
• IAW Marelli 59F - HW ver > 100
• IAW Marelli 5AF - HW ver < 100
• IAW Marelli 5AF - HW ver > 100
• IAW Marelli 5AM Ducati
• IAW Marelli 5SF benzin
• IAW Marelli 5SM benzin

[Multipla]

Hi filaalfa28 can you explain the component? Most resistance is 222smd = 2.2K why?
Tanks in advance.

[mikroel]

Hi filaalfa28 can you explain the component? Most resistance is 222smd = 2.2K why?
Tanks in advance.

if you do not mind, maybe I can give answer to you. They do not must be 2k2 resistors


Sent from my iPhone using Tapatalk

[Multipla]

if you do not mind, maybe I can give answer to you. They do not must be 2k2 resistors


Sent from my iPhone using Tapatalk

And why? what resistor I put inside of my pcb. Tanks.
I Know many pople who answer but I put right pic with firmware and I think I put ftdi with rigth firm the software respond but dont do anithing to ecu. Don reverginize nothing and end in 4% and fault.

[mikroel]

And why? what resistor I put inside of my pcb. Tanks.
I Know many pople who answer but I put right pic with firmware and I think I put ftdi with rigth firm the software respond but dont do anithing to ecu. Don reverginize nothing and end in 4% and fault.

Why? Because you can put other value.

You can easy calculate value if you look in schematic.


Sent from my iPhone using Tapatalk

[eric paris]

hello,
beside the quartz it's resistor ?
it's not the capa for the quartz ?

[Multipla]

hello,
beside the quartz it's resistor ?
it's not the capa for the quartz ?

2X22pico fharad

[Multipla]

Why? Because you can put other value.

You can easy calculate value if you look in schematic.


Sent from my iPhone using Tapatalk

I Look 222 and is 2k2?