59F decoder tool open project with hex files

**filaalfa28** · 19th June, 2018, 10:15 PM

hi Multipla everything is here for the components page 4 (http://www.digital-kaos.co.uk/forums...ghlight=iaw59f).
the component for the best result are 0805 for the size except the two capacitor FOR the quartz the best is just 0603.

**filaalfa28** · 19th June, 2018, 10:17 PM

Originally Posted by Multipla

Hi filaalfa28 can you explain the component? Most resistance is 222smd = 2.2K why?
Tanks in advance.

Dont care about the number just take the liste of page 4 in 0805 size except the two 22pico in 0603 size but you need a good solder iron.Best ragards

**filaalfa28** · 19th June, 2018, 10:25 PM

Originally Posted by giary74

Hi my friend,
I tested a PIC 16f876A because seller send me a wrong order, but it is not compatible... I will order 16f876...
Now I have a doubt: If I solder the 100nf SMD capacitor in the picture, I can't solder PIC... I must bend pins of the PIC?

I answer myself... i will solder smd capacitor on the opposite side of PCB as this picture ... is right?

No it is a mistake don't care about this component it don't exist in my pcb and what you see is the real pcb in just one side with all component. Why one side because i don't have the drill for make hole in the pcb it will cost too much time and money and everything is functional like this.It is just not very nice too see but i don't care about that, functional is just what i need too virgin my 9 iaw59f.

**kido resuri** · 20th July, 2018, 09:15 AM

Hi,

Very nice project!
Does it work without bootmode (full functions), or the IAW 59f ECU must be in bootmode to make immo off, or virgin?

Thank you.

**mikroel** · 23rd July, 2018, 09:13 AM

Originally Posted by kido resuri

Hi,

Very nice project!
Does it work without bootmode (full functions), or the IAW 59f ECU must be in bootmode to make immo off, or virgin?

Thank you.

Without boot mode, just by ecu connector, immo off and virgin.

Easy-pizzy

Sent from my iPhone using Tapatalk

**rafal090807** · 30th September, 2018, 09:03 AM

Hello
I am looking for this tool
Someone can give the project?
Thank you

**XJTAG** · 14th November, 2018, 08:43 AM

Originally Posted by giary74

Hi my friend,
I tested a PIC 16f876A because seller send me a wrong order, but it is not compatible... I will order 16f876...
Now I have a doubt: If I solder the 100nf SMD capacitor in the picture, I can't solder PIC... I must bend pins of the PIC?

I answer myself... i will solder smd capacitor on the opposite side of PCB as this picture ... is right?

hello @giary74

the PIC16f876A work for me , the PIC16f876 and PIC16f876A is same but only the bits setings no same

**mikroel** · 15th November, 2018, 10:53 PM

Sent from my iPhone using Tapatalk

**mikroel** · 15th November, 2018, 10:54 PM

Sent from my iPhone using Tapatalk

**danyguit2000** · 18th January, 2019, 03:29 PM

Hi mates,
Can anyone share the HEX file to this project please, as all links are dead...

Thanks in advance

**Syria777x** · 18th January, 2019, 05:25 PM

Originally Posted by caliskan71

include hex,diagrams + softwares

thanks + rep > = pass : otocheck

https://mega.co.nz/#!D4ZU1BqK!Mr6fnD...k7nZSylvOlSZf8

Please pass

Thanks

Sent from my iPhone using Tapatalk

**danyguit2000** · 18th January, 2019, 06:09 PM

Originally Posted by danyguit2000

Hi mates,
Can anyone share the HEX file to this project please, as all links are dead...

Thanks in advance

Please, anyone?

**cp2010** · 18th January, 2019, 06:43 PM

please here...

**motorbike59** · 23rd January, 2019, 11:52 AM

hi mikroel I need device tell me the price

**XJTAG** · 29th January, 2019, 07:53 AM

[DEVIS = cp2010; 3476569] s'il vous plaît ici ... [/ DEVIS]

thanks cp2010 your diagram is good, see my pcb i delate 7805 ici and change the relay bye two 12v, is not comply becaue i no find ftdi232 and lm339 ,

for "les dz" can you cal me for this pcb