i guess the original layout works for most of us so i would suggest doublechecking your pcb before changing any components - i doubt if changing the 1K resistor will solve your problem but you can always try it....
i guess the original layout works for most of us so i would suggest doublechecking your pcb before changing any components - i doubt if changing the 1K resistor will solve your problem but you can always try it....
You can confirm this link?pin-db9_59f.jpg
prejudice you have the file for the drilling of the PCD?
Thank you in advance
I programmed rl working properly
hi friends, help reprogram FT232RL 3.3V 5V FTDI USB to TTL Converter Adapter if it is possible do, read eeprom ori ok ,reprog failed
read ori eeprom ok.JPGreprog eeprom failed.JPGftdi usb.jpg
hi friend.who have PBC in lay format?
mprog drivers for IAW.
rl232 only for those who have already been programmed for iaw 59
Last edited by carmansk; 20th March, 2016 at 01:57 AM.
my
Also with the new chip does not work! where am I wrong? help
new chip ft232rl wirgin.JPGno device.JPG
the project file is not there for the drilling of pcb .. anyone has this file?
how to program a new chip? unknown Device
Last edited by berard; 13th May, 2019 at 02:28 PM.
Bookmarks