Hi there.
I have the same fault "Error while transferring data in reading" but ECU is Bosch ME1.5.5 which is present in Vauxhall(Opel) Corsa C 1.2 16V.
My kess 5.017 is china but reworked,
Actually it was just reworked, tested on 2 other ecu and worked ok.
I try this ecu read via Galetto v54(reworked) and is problem as well.
So i think is maybe my ecu not readable ....
At the moment what i read on the internet... My ecu. ME1.5.5 is present in alfa romeo as well. And there no one box can't read this ecu. To the bench as well.. Only option is writing but just overwrite.. With specially trick (pin 10 obd2 connect with Ground or 12v i can't remember now) This is like protection.... Try read more infos in the internet.. Maybe you found something
Sent from my LG-H990 using Tapatalk
Last edited by pocinas; 2nd November, 2017 at 06:12 PM.
My post helps you? Please Hit Buttons
fiat-alfa-lancia have bosch m1.5.5 (not readable, only writing)
http://www.bluestreak.co.uk/img/M1.5.5.%20%20%20WEB.gif
opel have bosch me1.5.5 (reading and writing by obd without problem...also with kwp2000)
http://cdn1.bigcommerce.com/server45...00.659.jpg?c=2
M1.5.5 and ME1.5.5 is not the same ecu
Hello people
I bought recently a KESS V2 5.017 clone
I try to read the ecu via OBD from a Lancia Y 2002 (IAW 59F). I deal two matters,
first after the reading it appears a message for check sum error (i read later that needs c++, i install it but i haven't test it yet, to check if the check sum error fixed).
The second matter is that i read 3 times ecu via obd, each time needs around 35 minutes to complete the procedure and the exported file it was only 256 kb.. What is the necessary avarage time to read a ecu with KESS via OBD. Does it has any setting in order to improve the needed time?
Thatnks in advance
Alex
Last edited by alexauto12; 17th November, 2017 at 12:15 AM.
All ecu have different time of read/write...
Like edc16c39 read -45min write-2min...
But for example - me 7.1.1 - read30min write-30min
Edc16u1 read -10min write-2min
Merc edc16cp36 - read and write around 2min...
So time isnt important...
Files for
Edc15 are 512kb/1mb
Edc16 are 1/2mb
Edc17 2/4mb
Just check with Winols is it recognized or not...
Wysłane z iPhone za pomocą Tapatalk
Chiptuning - Diesel / Petrol / Stage1,2,3 / HIGH Petrol Tuning
DSG TUNING
DPF / EGR / TVA / SAI / Lambda
Crackle map ( Launch Control + No lift Shift + Antilag )
File Service
PCMFLASH / BFLASH / AMT BST / AMT MPPS / TGFLASH / BITBOX / EDCSUITEPRO - Genuine USER
alexauto12 (20th November, 2017), Eddie034 (26th November, 2017)
alexauto12 (20th November, 2017)
Thank you mates
I worried that the my kess had problem.
One more quetion. my clone has green pcb (not eu version). Is ir worthly to reworked it, due to many components are defferent in comparison with the original? Except components replace do i need to reprogramming the npx processor? (note that i will not change version, my kess has allready 5.017).
Thank in advanced
what do you guys think about this kess 5.017 with reset button ? is it worth about 200$ with taxes and shipment ? 5.017.JPG
does anyone have this kind of 5.017 ? i know is a clone , and a clone is a clone but i want to know if it can be reowrked and if the token button works .
5.017 no need reset button...is unlimited tokens
inside forum:ask me about...i will tell you all that i know
make me working for you...i will give you my paypal account
outside forum:
chiptuning,egr,dpf,add blue,dtc,Eu clones
maajkii (21st November, 2017)
so it means that this china s..it isn't a 5.017 ? seen on many places advertised as a 5.017 ? wtf ?
5017 no token and good internet conection
Bookmarks