Kess V2 Harware Rework - FREE SOLUTION!

[morgano]

whats best operating system to use kess with ? i hear win 7 professional, then xp second, also i read
1.Q.During reading ECU data,get "checksum error".
A.Please research this software "visual C++ 2005 library" on google,download and install

Necessary ? you think c++ 2005 ?
i seem to get 2mb or 1mb or 512kb read, then when file looked at i have a bad read all 000000 and ffffffffffff
then sometimes on write checksum buffer error,

i would maybe resolder Kess RAM chip.

[pulsar2000]

i would maybe resolder Kess RAM chip.

you mean nxp ? never heard of ram chip, any idea were is on board Morgano,,, Thanks

[gazvts]

ESMT M12L2561616A

[BubbaFet]

Can someon _please_ write a quick'n'dirty howto on updating the firmware to 4.0xx ?

What is needed?
Is it updates by JLink, posted software?
What SW version can be used afterwards?

I'm getting _really_ confused with all this personal nick'nack. :/

[pulsar2000]

ESMT M12L2561616A

cheers Gaz, we spoke earlier, any ideas ? u know the score, real installer used, and now self reset, just want tool working,,,,your clued up any info

[8.23.motor]

have solution kess full protocol fw 4024 contact me


No ID posted please

[yourmate]

doesnt install as such like original, just copy folder over, and click on k suite

I've got some problem with understanding your post but if you meant what I think you did then you do not do an "initial" install just copy over.
I don't know if your reading inconsistencies are related to sw or hw but to make the software part sorted out is a tad bit easier so I'd start with that...

Try this:
- get rid of everything KSuite related from the PC/laptop
- install "original installer" from link
- THEN copy KSuite v2.8 folder from same link
- test...


ps. Have you seen my PM?


EDIT:
It even works on a Win 7 VM running on a Win 7 x64 Ultimate system

[yourmate]

Can someon _please_ write a quick'n'dirty howto on updating the firmware to 4.0xx ?

Download the stuff from here the write up is in the "HOWTO and other stuff"
I just repacked the stuff and rewrite the "manual" a bit which was posted by gazvts originally.

Strictly NO PASSWORD

[beltronics]

whats best operating system to use kess with ? i hear win 7 professional, then xp second, also i read
1.Q.During reading ECU data,get "checksum error".
A.Please research this software "visual C++ 2005 library" on google,download and install

Necessary ? you think c++ 2005 ?
i seem to get 2mb or 1mb or 512kb read, then when file looked at i have a bad read all 000000 and ffffffffffff
then sometimes on write checksum buffer error,

That error came to me yesterday to me, edc17c46 vag.
Used windows 7 Professional 64bit, change to windows xp professional and solved.


regards

[Chippy0815]

@yourmate
mate but your manual isn't correct...the one from gazvts is better, even it is for you hard to understand....
the parts you describe are not wrong in the way to say it won't work in this way...but they are unneeded.

[yourmate]

what do you mean?

[Chippy0815]

for kess just as simple:
flash fw
write new files to sdcard
push update files to update folder
update
finish
enjoy

[BubbaFet]

for kess just as simple:
flash fw

How do we flash the fw? With jlink?

[Chippy0815]

you can flash by whatever you want.

ISP, serial

[pulsar2000]

I've got some problem with understanding your post but if you meant what I think you did then you do not do an "initial" install just copy over.
I don't know if your reading inconsistencies are related to sw or hw but to make the software part sorted out is a tad bit easier so I'd start with that...

Try this:
- get rid of everything KSuite related from the PC/laptop
- install "original installer" from link
- THEN copy KSuite v2.8 folder from same link
- test...


ps. Have you seen my PM?


EDIT:
It even works on a Win 7 VM running on a Win 7 x64 Ultimate system

Not so simple using dannys edited sw, self reset, as my tool has self reset button, so have to use his sw, will try another laptop, see if get better reads