Kess V2 Harware Rework - FREE SOLUTION!

[a4b5rs4]

You need carefully read thread from the beginning.

what is better?
to buy kess china with red pcb?
or convert 50 € of the old one?



Wysłane z iPhone za pomocą Tapatalk

[bigbang63]

hello, If i was you, I'll buy a red kess V2 , the price is very low around 85€ and just rework soldering hole and it will be great.
this is mine, like Pluto gave me the link : https://fr.aliexpress.com/item/Newes...311.0.0.yGrRDQ

[a4b5rs4]

I see but cost reworked ist 50€



Wysłane z iPhone za pomocą Tapatalk

[blackcorri]

Red kess must also be revised

[bigbang63]

Is it a question?
Rework some composants, but to change in EU you must buy nxp with SD card and EU firmware see car-prog , to change nxp it's very hard .
If you have better solution say us , thank you 😉

[pluto2013]

hello, If i was you, I'll buy a red kess V2 , the price is very low around 85€ and just rework soldering hole and it will be great.
this is mine, like Pluto gave me the link : https://fr.aliexpress.com/item/Newes...311.0.0.yGrRDQ

Wtf they are now 80€


Verzonden vanaf mijn iPhone met Tapatalk

[wen20v]

The new Kess clones v2.35 have better pcb than older versions? Thanks.

[DR Race]

The new Kess clones v2.35 have better pcb than older versions? Thanks.

They are no New clone , 2.35 ist only Software with Sama hw, its only China Marketing!

Trimis de pe al meu SM-G930F folosind Tapatalk

[bigbang63]

Hi,
Have you information about Sama HW?

[DR Race]

Hi,
Have you information about Sama HW?

My friend belive me , at this moment it is no new clone to sell , and 5.017 work perfekt with 2.22 or 2.23 , new software version bring only trouble!!

Trimis de pe al meu SM-G930F folosind Tapatalk

[Miniturb0]

i have an original kess v2 slave what is the process to convert this to master and what is the software and firmware that i am able to use thanks

[DR Race]

i have an original kess v2 slave what is the process to convert this to master and what is the software and firmware that i am able to use thanks

You have to change Lpc chip and sd card from master , for now best is se 2.23 for kess so far i know , you can buy China chip or euro chip with sd card ! But eurochip only from good suplier , a lot of sellers selling China chip as euro

Trimis de pe al meu SM-G930F folosind Tapatalk

[vatovey]

I have a Chinese Kess v2 5.017 clone, am looking to rework the PCB with quality components.

Does anyone have a parts/component list of what is required, along with part numbers from UK stockists... like RS/Maplin/CPC ?

[bigbang63]

I have a Chinese Kess v2 5.017 clone, am looking to rework the PCB with quality components.

Does anyone have a parts/component list of what is required, along with part numbers from UK stockists... like RS/Maplin/CPC ?

hi,
you can do this :original.jpg
the photo is genuine kess and you can change a few components
see the manual ; it's in french
thanks will be great

[bersch8688]

Have one Job but i dont know to do this.
VW Golf 7 2017
1.4TFSI 150HP


I dont work anytime with Virtual Files!
Work the NEW Kess V2 5.017 + REWORK all Components with Virtual Files?


Thanks for all Information