Kess V2 Harware Rework - FREE SOLUTION!

**Myjector** · 8th April, 2018, 09:18 PM

Hi Yes it works thru OBD read and write (EU Clone from CN

)

**matose** · 12th April, 2018, 11:58 PM

Where can i buy original SD cards for Kess 5.017 Red China and KTag 7.020 Red China?

**DR Race** · 15th April, 2018, 08:39 PM

Hy , has somebody tested kess 5.017 purple pcb on Peugeot RCZ 1.6 THP 155 hp med 17.4 truh OBD, in my k suite protocole is open and when I click on this car pop up warning , after programming I should turn off all power consumer (clima, radio , el Windows) in order to avoid car going in eco mode, I never made Peugeot cars , any of them , if someone has worked with kess on this ecu truh OBD please post one answer, any answer will be appreciated

**DR Race** · 15th April, 2018, 08:46 PM

..........

**Locker** · 17th April, 2018, 08:10 PM

I have a china Ktag that i am trying to make it work...if anyone have solution or can help plz pm me

**DR Race** · 17th April, 2018, 08:16 PM

Originally Posted by Locker

I have a china Ktag that i am trying to make it work...if anyone have solution or can help plz pm me

What don't work ?

Trimis de pe al meu SM-G930F folosind Tapatalk

**rh03** · 17th April, 2018, 08:40 PM

[QUOTE = Locker; 3263946] J'ai une Ktag en Chine que j'essaie de faire fonctionner ... si quelqu'un a une solution ou peut aider plz pm moi [/ QUOTE]

Do you want rework your ktag or you have problem with it ?

**Locker** · 19th April, 2018, 10:39 AM

I had a ktag that i bought from china couple years back and never used it
Last week i had an msv70 swap to do so i decided to try to use the ktag, it worked for reading one ecu so i thought it was good for the job
the second day i came back to the shop to do the swap, but ktag stopped working, it is giving me the following error:
k-tag communication error

lease check power connections- 0x100B
Note that the pc i use is connected to the internet...i donno if this is what caused the problem

My ktag is old...i donno from how many years i have bought it. I want to know if i am better try to fix it or buy a new one (china or eu clone)

I attached a photo of my tool.ktag.jpg

**teamtuner** · 19th April, 2018, 12:32 PM

Originally Posted by Locker

I had a ktag that i bought from china couple years back and never used it
Last week i had an msv70 swap to do so i decided to try to use the ktag, it worked for reading one ecu so i thought it was good for the job
the second day i came back to the shop to do the swap, but ktag stopped working, it is giving me the following error:
k-tag communication error

lease check power connections- 0x100B
Note that the pc i use is connected to the internet...i donno if this is what caused the problem

My ktag is old...i donno from how many years i have bought it. I want to know if i am better try to fix it or buy a new one (china or eu clone)

I attached a photo of my tool.ktag.jpg

open ksuite...press info button and post all info about firmware version,client code...etc

**DR Race** · 19th April, 2018, 12:44 PM

Hy , has somebody tested kess 5.017 purple pcb on Peugeot RCZ 1.6 THP 155 hp med 17.4 truh OBD, in my k suite protocole is open and when I click on this car pop up warning , after programming I should turn off all power consumer (clima, radio , el Windows) in order to avoid car going in eco mode, I never made Peugeot cars , any of them , if someone has worked with kess on this ecu truh OBD please post one answer, any answer will be appreciated

Trimis de pe al meu SM-G930F folosind Tapatalk

**juse** · 20th April, 2018, 05:00 PM

Old news, problem solved, thanks to teamtuner!

Lähetetty minun SM-A520F laitteesta Tapatalkilla

**DR Race** · 21st April, 2018, 08:47 PM

Originally Posted by juse

Old news, problem solved, thanks to teamtuner!

Lähetetty minun SM-A520F laitteesta Tapatalkilla

How did you solve it ?

Trimis de pe al meu SM-G930F folosind Tapatalk

**juse** · 21st April, 2018, 09:29 PM

Originally Posted by DR Race

How did you solve it ?

Trimis de pe al meu SM-G930F folosind Tapatalk

Got the sw and tool running, there is some holiday in black sea again.

**ptikkala** · 23rd April, 2018, 05:54 PM

Anyone got this http://www.eobdtool.co.uk/wholesale/...u-version.html ? I got one and have problems with reading EDC17C46. Ive tried it with p199 and it reads 10% and then read error. Used some old ktag from a friend and success full reads with it using the same wiring.

**juse** · 23rd April, 2018, 05:57 PM

Originally Posted by ptikkala

Anyone got this http://www.eobdtool.co.uk/wholesale/...u-version.html ? I got one and have problems with reading EDC17C46. Ive tried it with p199 and it reads 10% and then read error. Used some old ktag from a friend and success full reads with it using the same wiring.

Wise men say that its not as stable as older models

Lähetetty minun SM-A520F laitteesta Tapatalkilla