Nathan3001, really?
Search in the thread mate.
Everything that you need is here bud. ;-)
Nathan3001, really?
Search in the thread mate.
Everything that you need is here bud. ;-)
hi bud yea i see info at the start page. but its only giving items needed not the numbers for each chip unless i just cant see it ?
Is it more worth to buy a china clone and rework it or to buy a EU purple pcb?
Last edited by Sefior; 17th July, 2018 at 06:21 PM.
This is how my Kess V2 looks.
Is it good quality?
What needs to be changed?
Thanks.
Mykess1.jpgMykess2.jpgMykess3.jpg
This is what you need to replace, this is how it look a good rework for clone tool,replace all components with good quality one , oscillator murata 8mhz ,replace all capacitor with good quality, kemeth, Panasonic etc. Replace all transistor with original infineon or STI. Replace all 27E diodes, take a look at sd card pins if good sholdered ,and most important, use appropriate software for your hardware, new releas 2.47 is only stupid marketing from.china sellers, 5.017 work ok with 2.22 and 2.23. !
If I helped you please thenks ,and rep!
Trimis de pe al meu SM-G960F folosind Tapatalk
Last edited by DR Race; 17th July, 2018 at 11:13 PM.
Gohard20 (20th July, 2018), marcomomma (18th July, 2018), nojmi7 (20th July, 2018)
kess v2 parts with farnell and rs order codes
=============
Transistors to use :
---------------------
5x BCR112 sot23 farnell code: 8737258 must buy 5+
rscomponents: 287-667 packs of 10
4x MMUN2113 / PDTA144ET sot23 farnell code: 8736987 must buy 5+
rscomponents: 690-0133 packs of 25
3x BC817 sot23 farnell code: 1081223 must buy 5+
rscomponents: 216-9410 packs of 20
2x BC807 sot23 farnell code: 1081222 must buy 5+
rscomponents: 216-9404 packs of 20
5x NUP2105LT1G / PESD2CAN sot23 farnell code: 1510712 must buy 5+
rscomponents: 464-255 packs of 20
Murata filters:
----------------
6x NFE61PT472C1H9L (connect ground for all of them) farnell code: 9528229 must buy 5+
rs components: 188-8772 pack of 20
2*1uF - 35V case size C farnell code: 1457460
2*220uF - 10V case size D farnell code: 1793889
9*10uF - 16V tantalum case size C farnell code: 1457464
this are some of component that must replace by reworking kess , replace all component and kess work good
i dont find anymore complet list for rework if i find rest i will post !
djtappage (29th January, 2019), hamedladan (26th August, 2021), jaslen (12th September, 2018), samux (5th August, 2018), zalimhan74 (3rd April, 2024)
Do you use hot air solder for rework? Or classic solder?
I use induction solder iron, hot air only for removing China components, buy you must take care , not to hot and not to much ,because are many components that you must not remove, you can make this better with aluminum foil, cover with aluminum foil all components and cut off only component to be removed!
Trimis de pe al meu SM-G960F folosind Tapatalk
cawadany (31st July, 2018)
Sold, no more to give !
Last edited by DR Race; 11th August, 2018 at 07:02 PM.
DR Race (6th August, 2018)
please i need sd card image kess v2 5.017 clone version
i formated my sd card and had no protocol found error
I have a kess v2 green pcb with fw 3.099 and ksuite v2.10 what I can do this to update or reset the tokens?
juse (11th August, 2018)
Bookmarks