Hi guys, I'm having some problems cutting a mercedes a mercedes hu64 with my condor. Its not the mini, but think support would be the same & this thread is more active than the condor support thread.
Basically the blades I cut wouldnt work & didnt look the same. I tried a few things & couldnt get it to work. I ended up going to another shop & they cut it & it worked. I then read the key he cut & cut from that & my cut key worked too. So obviously condor mis having trouble reading the original key but is ok with reading the key the locksmith cut......I just dont know why
attached is a pic of the 3 keys.
the top one is the original-condor read as 1 3 2 2 3 1 3 5 5 3
the middle one is the key that condor cut from the original-when I read this in the condor it reads the same as the original
the bottom key is the one the other shop cut & it reads 3 2 2 3 1 3 5 5 3 3-this opens the door
I can see that the bittings are all moved up 1 space on the key that works. but as I said, when I read the working key in the condor it reads & cuts ok. I'm thinking there is an issue with the decoding on the condor. can anyone shed some light on this for me?
Condor Mini V4.0.1 Update (2017.06.16):
??????????????
+Add universal key decode function
+Add M2-D function
+Add motor sensor testing function
*Modify probe/cutter detection
*Fix machine may crash error problem
*Fix HU49 key decode error
*Fix HU66 cutting speed issue
*Fix BW6 cutting error
*Fix TBE1 cutting error
Notes:
1.New update for both SN KM02/KM03 machines
2.New function:Main Interface-Key Duplication-Universal Type
3.Universal Type support decode/cutting parts of home & vehicle keys
4.Please keep the whole key clean and conductivity good(ensure without dust/oil)
5.For one side key(thickness of whole key usually 1.5mm or 2.00mm) please add a shim/business card under the key,ensure the whole key thickness should more than 3mm
condor xc mini v4.0.1 KM02 KM03.txt
Use search in D.K. This has been discussed before.
In your cutting condor menu, you will find more then 1 type of hu64.
Only 1 is in the decoding section.
Go look for the hu64 cutting options.
Get a caliper, and look for the firts and last cut position. So you wil know what type you have.
cqae (17th June, 2017)
hello guys...
i need help with the toyota corolla blade i can't find it into the mini condor list
can someone send me file or info of measurements of the key to add it to the mini condor?
715e5bb0-ceb8-4c75-ac00-e74c0b8b7b4a.jpg
How to cut va6 blade with condor mini??
It is a VA8
A va6 is 6 cuts, this va8 is with 8 cuts.
It is in the menu.
You could use a va2 blade.
Now pay attention!!!! A to short blade, will not work!
After cutting, first try blade in ignition lock. Only then you insert it in the remote.
Toyota extended.jpg
A original keys, blade holder, is extended, giving some extra room between keycoil, and remote.
A xhorse or keydiy remote, blade holder, is not extended.
Last edited by rob h; 26th July, 2020 at 01:38 PM.
Rob h
Please could you advise cut & depth measurements as I would like to make a new profile for my Miracle A5
Regarding Smart car YM23
Thanks.
Bookmarks