lush29 (4th April, 2017)
lush29 (4th April, 2017)
hi it look like the key need to slide in about 2mm more until it jam the shoulder, or maybe the machine need to calibrate
cj
lush29 (4th April, 2017)
thanks both of you.
i ordered yesterday hon66 blades for calibrating the cuter,maybe calibrating is my problem.anyway in few days i get the blades and i will start all calibrating procedures from the beginning as per manual and then try and report.
thanks again
hi all,
problem solved,today i got my hon66 blades i run an proper calibration incl the cutting calibrating, and after that i cut 2 hu66 keys with no problem.
just want to thank all who helped me. thanks again
Any news/ updates on the hu100?
Sent from my iPhone using Tapatalk
My condor started cutting strange, VW and Mazda keys seem to be off and Honda Laser Cut Style...is there some type of calibration that needs to be done?
lush29 (11th May, 2017)
From where can I buy the condor apart from xhorse?a trusted seller please..
Thank you
Inviato dal mio HTC One utilizzando Tapatalk
lush29 (15th May, 2017)
Hi all. Have an prob. I am trying to decode and cut an spare key for range hu101 key. So i chose hu101 ford and try to devode but snapped 3 probes on me so far. Is any try hu101 happen the same or my machine is problem? Or ford keys are still problem? Thanks
Sent from my iPhone using Tapatalk
What is it snapping on???
Sounds like you need to calibrate the machine and check continuity to probe
Also make sure the key is clean!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!
Evening, Anyone able to give me the bitting for a Nissan DAT12 with code 6869
Thanks in advance.
Bookmarks