VVDI PROG

**duplikeytor** · 22nd March, 2017, 09:49 PM

Originally Posted by duplikeytor

Hi

I try secure method and it read ID as FFFF. When I select to reset unlock, it cannot crack chip and says connection might be wrong

Any idea? MC9S12XEG384CAL

I checked connection and 100% right

So of course, connection was not 100% right when I thought it was

, I finally was able to read it via the programmer.

ID of chip is correct and when clicking on Reset Sec

[2017-03-22 16:49:01] : Backup the <2-MCU_MOTOROLA-MC9S12_MC9S12XEG384_SECURED> Reset Sec operation security area data in file: 20170322_164901_2-MCU_MOTOROLA-MC9S12_MC9S12XEG384_SECURED_backup_data.bin
[2017-03-22 16:49:01] : Start communication...
[2017-03-22 16:49:01] : Chip is not crypt FE
[2017-03-22 16:49:01] : End communication...
[2017-03-22 16:49:02] : Operation success

Does this mean it's not secured?

Also when trying to read D-Flash, it's empty, I only have EEE and P-FLASH

**daxxer** · 22nd March, 2017, 09:54 PM

Originally Posted by duplikeytor

So of course, connection was not 100% right when I thought it was

, I finally was able to read it via the programmer.

ID of chip is correct and when clicking on Reset Sec

[2017-03-22 16:49:01] : Backup the <2-MCU_MOTOROLA-MC9S12_MC9S12XEG384_SECURED> Reset Sec operation security area data in file: 20170322_164901_2-MCU_MOTOROLA-MC9S12_MC9S12XEG384_SECURED_backup_data.bin
[2017-03-22 16:49:01] : Start communication...
[2017-03-22 16:49:01] : Chip is not crypt FE
[2017-03-22 16:49:01] : End communication...
[2017-03-22 16:49:02] : Operation success

Does this mean it's not secured?

Also when trying to read D-Flash, it's empty, I only have EEE and P-FLASH

Yes...right

thats mean this MCU is not secured

i have read D-flash from ISM/DSM MCU and was empty too...

**ibratex** · 24th March, 2017, 11:54 AM

Hello .

Can you make pinouts with vvdi prog for mb91f061bs in suzuki jimny 2015 ?? Please

Need help urgent please

Enviado do meu SM-J320FN atrav?s de Tapatalk

**iHenry3** · 24th March, 2017, 06:36 PM

Working on PORSCHE PANAMERA 2M25J MASK ID:C482, I Have tried to decrypt several times. I only get failure to crack check connections, I have removed the two components as shown in diagram. I have check connections still same issue.

Capture.jpg

**daxxer** · 24th March, 2017, 08:24 PM

Originally Posted by iHenry3

Working on PORSCHE PANAMERA 2M25J MASK ID:C482, I Have tried to decrypt several times. I only get failure to crack check connections, I have removed the two components as shown in diagram. I have check connections still same issue.

Capture.jpg

picture is too small to see there something

try to lift some pins like EXTAL and RESET, maybe help...

**iHenry3** · 24th March, 2017, 10:43 PM

Originally Posted by daxxer

picture is too small to see there something

try to lift some pins like EXTAL and RESET, maybe help...

when you have read this module in the past which leads you tried first ?

**duplikeytor** · 25th March, 2017, 01:15 AM

Originally Posted by daxxer

Yes...right

thats mean this MCU is not secured

i have read D-flash from ISM/DSM MCU and was empty too...

I

I can confirm VVDI PROG have problem reading D Flash as I read the same board with SMOK and it read the EEPROM and P FLASH identical to VVDI PROG and also was able to read the D FLASH MEMEORY. SO VVDI PROG have problem reading D FLASH.

Is the P and D FLash the same for the same mask across boards? And only the eeprom is different?

**daxxer** · 25th March, 2017, 07:20 AM

Originally Posted by duplikeytor

I

I can confirm VVDI PROG have problem reading D Flash as I read the same board with SMOK and it read the EEPROM and P FLASH identical to VVDI PROG and also was able to read the D FLASH MEMEORY. SO VVDI PROG have problem reading D FLASH.
Is the P and D FLash the same for the same mask across boards? And only the eeprom is different?

i try this same MCU read with Xprog too, but the same results....EEPROM+P-Flash ok, D-flash empty.