VVDI PROG

**ibratex** · 28th December, 2017, 09:59 PM

Hello ... a While i am almost looked everywhere to read sim2k 341 to clone ecu but i couldnt find a good pinout for this

I saw this post
http://blog.xhorsevvdi.com/vvdi-prog...ecu-sim2k-341/

Samic please i need this option urgent can you make the pinouts more clear please

Thanks alot in advance

**Perryking** · 29th December, 2017, 07:47 PM

Hi, I buy VVDI Prog thinking was a good tool.

First job is Mondeo dash HC912D60. No way to read. VVDI can´t find right oscillator. Even in manual setting to 8000Hz, it can't read. So I use my old and original UPA and read perfect.

Whats the problem?

Second job is Mercedes W163 AAM Module, MC68HC705X32 0G47V. Need adapter. No adapter in market yet.

**hipolitogt** · 29th December, 2017, 08:33 PM

Originally Posted by Perryking

Hi, I buy VVDI Prog thinking was a good tool.

First job is Mondeo dash HC912D60. No way to read. VVDI can´t find right oscillator. Even in manual setting to 8000Hz, it can't read. So I use my old and original UPA and read perfect.

Whats the problem?

Second job is Mercedes W163 AAM Module, MC68HC705X32 0G47V. Need adapter. No adapter in market yet.

Keep working with it. It's a very good tool. I'm using it instead carprog, xprog and UPA.

Enviado desde mi SM-G955F mediante Tapatalk

**Perryking** · 29th December, 2017, 10:56 PM

I think this tool needs a lot of good updates.

Why yellow led blinking when plugin to usb? I don´t know if my vvdi is ok.

Also I think wires are too short, it was so difficult when I tried to solder to dashboard, it need a longer wires.

**ttzag** · 29th December, 2017, 11:03 PM

Originally Posted by Perryking

I think this tool needs a lot of good updates.

Why yellow led blinking when plugin to usb? I don´t know if my vvdi is ok.

Also I think wires are too short, it was so difficult when I tried to solder to dashboard, it need a longer wires.

yellow led blinking it's normal .
about wires you are right but it's better for read

**automotrizVIP** · 30th December, 2017, 05:10 AM

hello, I personally in the cables if you are right, but it is not advisable to extend them ..., but it is not advisable to put it further
but if you want you can add an annexation...
catch a winding or winding ( add 5 cm to each point)...
I recommend you not be too thick....

**CarCity** · 30th December, 2017, 05:28 AM

Originally Posted by ibratex

Hello ... a While i am almost looked everywhere to read sim2k 341 to clone ecu but i couldnt find a good pinout for this

I saw this post
http://blog.xhorsevvdi.com/vvdi-prog...ecu-sim2k-341/

Samic please i need this option urgent can you make the pinouts more clear please

Thanks alot in advance

See #1465

This my post I read this ECU a long time ego

Xhorse team stamp in my picture

**automotrizVIP** · 30th December, 2017, 05:44 AM

Originally Posted by CarCity

See #1465

This my post I read this ECU a long time ego

Xhorse team stamp in my picture

I think that is the original, that page copies all of the forums,

**CarCity** · 30th December, 2017, 05:59 AM

Originally Posted by automotrizVIP

I think that is the original, that page copies all of the forums,

I'm not upset by this
If Xhorse team can support ( add in VVDI-Prog ) I can share BDM read for this type ECU's

MPC562-S29CD016J(IX55-Sonata-Sportage ...)

PIN 1=DSDO
PIN 3=PORST/HRESET
PIN 5=DSCK
PIN 6=VF0/VFLS0
PIN 7=DSDI
PIN 10=GND

**automotrizVIP** · 30th December, 2017, 01:58 PM

Am29f400....
Did not you try to read the flash?
@samic asks for good pictures...
he edits them to update them, or that made me understand with the ems3231....

**CarCity** · 30th December, 2017, 02:13 PM

Originally Posted by automotrizVIP

Am29f400....
Did not you try to read the flash?
@samic asks for good pictures...
he edits them to update them, or that made me understand with the ems3231....

I read EEprom + Flash very easy by can line
( If samic wants to I can share the Delphi-MT60/MT80 whit TRICORE )
Good pictures :

photo_2017-12-30_16-38-32.jpg

**polys123** · 30th December, 2017, 06:02 PM

hi
how connect read 29f400
you have adapter?

**automotrizVIP** · 30th December, 2017, 11:22 PM

Originally Posted by polys123

hi
how connect read 29f400
you have adapter?

Here......
Adapter in construccion /@samic...
http://www.digital-kaos.co.uk/forums...=1#post3146375

**CarCity** · 31st December, 2017, 07:29 AM

Delphi MT60/MT80
With Tricore IC
Connection by VVDI-Prog ECU cable :
(Note: unsolder PIN 122 from PCB )

Sent from my iPhone using Tapatalk

**laki23** · 31st December, 2017, 04:10 PM

Hello, i have a problem with eeprom clip adapter v1.1 !! I believe I made a mistake !!! it works just fine until I left the adapter, of course with no eeprom in clip, to the programmer and at the same time I worked hc908 qfp64 !! after this my nonsense eeprom adapter is not working anymore !!! trying to read eeprom and sw. disconnect it USB from vvdi prog !! Any help how can fix this problem!??

thanks in advance!!

please help with this ! any idea?