VVDI PROG

[nynol]

hello. i have srs sensor vw21 with mcu rh850 r7f7010713 inside. I have vvdi prog and I try read this. pflash read ok, but dflash and boot was fail. Someone read this mcu?

[Emmy]

VVDI´s big problem!
after write EEPROM you dont read D-Flash again! anyone a solution for this problem?


Typ: 2-MCU
Brand: MOTORLA-MC9S12
Chip: MC9S12XEQ384_UNSECURED


*edit:

for example, with orange programmer is it nor problem. why cant do this vvdi?

[mojomojo]

Now reading is ok but i can't write. I'm trying with CLR Protect but also without success

try another version of 93x66..happeneded to me before but i forgot exactly how i solvex it... but im sure it has to do with epprom selection...93c66,93s66..try different manufacturers hit stay withi. 93x66 series

[CarCity]

Hi all friends
Did anyone experience successful operations with the D160 EEprom ?
Write and erase INC ?

Thank for your advance

[lukasz61]

I was trying yesterday with 080D0WQ and vvdi can work only with new chip. It even can't even read used one. I've read with PaSoft, edit VIN and KM and then write to new one.

[CarCity]

I was trying yesterday with 080D0WQ and vvdi can work only with new chip. It even can't even read used one. I've read with PaSoft, edit VIN and KM and then write to new one.

But I worked all Ok in D80 => read and erase (INC) so write ( Without adapter )

[exe123]

VVDI´s big problem!
after write EEPROM you dont read D-Flash again! anyone a solution for this problem?


Typ: 2-MCU
Brand: MOTORLA-MC9S12
Chip: MC9S12XEQ384_UNSECURED


*edit:

for example, with orange programmer is it nor problem. why cant do this vvdi?

Partition is configured for Dflash OR eeprom. Xprog-M does the same and it is correct like this.

[exe123]

I was trying yesterday with 080D0WQ and vvdi can work only with new chip. It even can't even read used one. I've read with PaSoft, edit VIN and KM and then write to new one.

Not true. It can read/write fine. Just made a Corsa-D and it also perfectly resets incremental area. Check your soldering or adapter.

[offsystem]

Partition is configured for Dflash OR eeprom. Xprog-M does the same and it is correct like this.

Vvdi working fine i made a lot of this mcu in vw Bcm which was also secured

[lukasz61]

Not true. It can read/write fine. Just made a Corsa-D and it also perfectly resets incremental area. Check your soldering or adapter.

Yes, my fault. Now everything is ok. Probably bad soldering.

[Emmy]

Partition is configured for Dflash OR eeprom. Xprog-M does the same and it is correct like this.

Yes, i know!
For example, after write partition to EEPROM maybe you must read D-Flash again? whats than? not possible with vvdi and x-prog
you have only one chance read the D-Flash

[exe123]

Yes, i know!
For example, after write partition to EEPROM maybe you must read D-Flash again? whats than? not possible with vvdi and x-prog
you have only one chance read the D-Flash

You don't understand the system. You have to decide how to configure the partitions. If all space is used for eeprom, there is no Dflash! If all space is used as Dflash, there is no eeprom.

[Maartinj]

Contact Xhorse Technical Support
or
link : http://www.xhorse.uk/issue/

From now you can contact Xhorse technical support and complain what is not work / issue with device you have.

Simple write all necessarily information and update pictures / log , and one of Xhorse tech support will contact you.

Please DONT USE THIS LINK to ask tech support "how to do.... or where to click to do ...." activations, prices etc

Please write your issue short and sweet.

[u.s]

Can we read BMW Bosch mevd 17.2.3 ecu to get isn ?

[WRX 14]

But I worked all Ok in D80 => read and erase (INC) so write ( Without adapter )

Am i doing something wrong here, I'm also having a problem with a 080DOWQ from BMW E90 instrument cluster.
Seems VVDI prog with the M35080 adapter is able to read the chip ok (certainly the mileage in dump ties up with what it should be), however when i try using the Erase INC button to clear the first 32 bytes it fails and gives the following error "Chip crack failure, please confirm the chip type and connection right, then try again !"

It's late and i've only tried in the adapter socket. Maybe tomorrow morning i can solder the chip onto the adapter and try again.
Is there anything else i maybe missing here?