VVDI PROG

**ravate** · 27th January, 2019, 05:17 AM

Vvdi prog 28fxxx
And 29fxx
Not writhe

Enviado de meu SM-G935F usando o Tapatalk

**daxxer** · 27th January, 2019, 08:34 AM

Originally Posted by ravate

Vvdi prog 28fxxx
And 29fxx
Not writhe

Enviado de meu SM-G935F usando o Tapatalk

did you erase 29Fxxx before write ???

**PremierD** · 27th January, 2019, 02:18 PM

....................

**rojhat** · 27th January, 2019, 02:57 PM

Hi he correct reading cas2 mcu Reading ? All read inst.same . Simple xprog can do properly

Envoyé de mon SM-A605FN en utilisant Tapatalk

**alclot** · 28th January, 2019, 09:38 PM

Hi mates,
Question and sorry for my ignorace but with "Xhorse VVDI Prog M35080/D80 Adapter" can I erase the 35080 SOIC8 from opel astra h dash and program full or with normal socket I can?
Thanks in advance

**CarCity** · 29th January, 2019, 07:17 AM

Originally Posted by alclot

Hi mates,
Question and sorry for my ignorace but with "Xhorse VVDI Prog M35080/D80 Adapter" can I erase the 35080 SOIC8 from opel astra h dash and program full or with normal socket I can?
Thanks in advance

Yes you can

**habbyb** · 29th January, 2019, 09:00 AM

Xhorse team , please add to read motorola HC05 mask 0D62J is not in list .

**datapage** · 29th January, 2019, 11:30 AM

vvdi prog worked well in frm3.
Now he accuses error, Frequecia.
Error of 2 ecu frm3, xprog 100% R / W.
Does anyone have this problem?

12v in =ok

solved.
Everything worked, I resounded DB25 connector

**exe123** · 29th January, 2019, 01:17 PM

Originally Posted by datapage

vvdi prog worked well in frm3.
Now he accuses error, Frequecia.
Error of 2 ecu frm3, xprog 100% R / W.
Does anyone have this problem?

12v in =ok

Check your mcu cable if the coax wire is fine. on mine one cable was broken after some use.

**datapage** · 29th January, 2019, 01:34 PM

frm3 does not use coaxial cable only gnd vcc rst bkgd

**CarCity** · 29th January, 2019, 04:20 PM

ABS MANDO-MGH60
Read and write (D-Flash+P-Flash)
OK

Sent from my iPhone using Tapatalk

**Medions** · 29th January, 2019, 06:57 PM

R5F61723 - Identification work, erase work, write error.

**Everythiinng** · 30th January, 2019, 03:59 PM

hi all,
i have a problem here, i cannot read 0l15y cas 3+, just goes trying and it doesnt read it, it does read ID tho.
i have soldered the pins all clean and all good
Need help please...

**comizelu** · 30th January, 2019, 05:02 PM

Originally Posted by Everythiinng

hi all,
i have a problem here, i cannot read 0l15y cas 3+, just goes trying and it doesnt read it, it does read ID tho.
i have soldered the pins all clean and all good
Need help please...

Post pictures..
Never had problems to read that mask

Sent from my MI MAX 3 using Tapatalk

**Everythiinng** · 31st January, 2019, 12:56 PM

Originally Posted by comizelu

Post pictures..
Never had problems to read that mask

Sent from my MI MAX 3 using Tapatalk

Pictures? What pictures mate, im telling you with words. I connected the pins 3 times yesterday i cleaned them checkedd if any of them is not working everything was fine in soldering state. On VVDI PROG state it was not, it was trying to crack went up until 100% and nothing, when i read ID it could read it, if i tried to crack with other MCU it did and read pieces of it. So it was not in solder fault it was either in software or hardware of VVDI PROG. Any solution i would appriciate it