Hi everybody
I am a new buyer for VVDi prog;i recieve my package yesterday;all is OK.
I m going to try it in the evening.
Best regards
H.E
Hi all Friends
I need to read FRM3R E70 VDM D-Flash
But VVDI-Prog not detect automatically D-FLASH and EEE memory size ?
what process I should try ?
Thank for your advance
I surprise those who do not want to use the Thanks and Reputation buttons but ask for the password of the files.
CarCity (13th November, 2018)
MCU : MC9S12XEQ384
I read that :
Corrupt D-Flash file detected! Results probably incorrect!
VIN: WBAFG8100DL28****
Production date: 12.12.2012
Programming date: ff.ff.ffff
HW-NR: 9206234 (Hardware part number)
SW-NR: ffffffffffff (Updated part number)
ZB-NR: ffffffffffff (Original part number)
S: 9287252 (Original part number)
and now need to repair this :
I surprise those who do not want to use the Thanks and Reputation buttons but ask for the password of the files.
As far as i understand for this MCU it is possbile to have D-FLASH and EEE in partitions.
But if for example: if D-Flash is 32KB then EEE is 0KB or if EEE is 4KB then D-FLASH is 0KB and of course full P-Flash. Correct me if i am wrong..
And for this MCU being used in BMW FRM modules it is P-Flash with EEE 4KB and no D-Flash(0KB) In VVDI Prog menu you can select under 8-OTHER->BMW->FRM-E-SERIES-XEQ384 and there is only EEE and P-FLASH options to read.
You should read EEE as 4KB and forget about D-Flash. If your EEE is corrupted i might not be able to help but i have files from 2012 E71 FRM XEQ384 EEE 4KB and P-FLASH.
Last edited by sniegavirs; 13th November, 2018 at 01:54 PM.
CarCity (13th November, 2018)
MCU Reflash Cable V3
Hi guys, I would like to read/write an ST10F269 with my VVDI Prog, but bit confused now.
Connection Diagram got an "Important!!!" tab, which titled as : MCU Reflash Cable V2 modified to V3, which about to modify cabling and remove resistors.
ST10F269 tab says use MCU Reflash Cable V2
Originally I have MCU Reflash Cable V3, but the cabling and other parts also looks same as the unmodified V2 which needs some costumisation by the Important tab.
So my question is that, should I modify my factory V3 cable as V2 > V3 or can use it "as factory" V3 and just solder to MCU ?
Sorry if hard to understand
u can use v3
kaleval (14th November, 2018)
ECU with gear box integred MCU ST10F275
**** Revised complet pinout ***
Last edited by lion0304; 16th November, 2018 at 09:47 AM.
Be polite. No Thanks + Rep, no HELP!!! Slava Ukcraine. Dead Putler civilians's killers!!!
CarCity (17th November, 2018)
VVDIPROG
Chrysler Occupant Classification Module connection
MC9S12DG128_Secured
3L40K
Chrysler OCM 56043195AT mcu 3L40K vvdiprog.jpgChrysler ocm.jpg
lalaina74 (17th November, 2018), lion0304 (17th November, 2018), Perryking (19th November, 2018), PocketHero (17th November, 2018)
Bookmarks