VVDI PROG

**Samic** · 26th October, 2015, 03:19 AM

Originally Posted by CryptoKey

found in all the versions, always the same. NOT ID-0000
MCU - 9S12DG256 also beaten.
this does not work!!!, nor welding, nor versions, all checked ..here the technical VVDI-PROG he stayed asleep.

mate,get ID 0000 or FFFF means haven't communication with the chip.please check the connection of chip.
and if you have other Motorola chip,please try to check whether can read.

**thebigk** · 28th October, 2015, 06:08 AM

has anyone had issues with this killing cas4?

I guess I am not so scared, since I can program a new one with autologic, but I am consider getting this to use with vvdi2. Cheers

**gopelhu** · 28th October, 2015, 06:15 AM

Originally Posted by CryptoKey

HI Samic.

CAS2 with 2K79X, there are two versions one can not read.
ID-2K79x not recognize possible that another pinout, R270 says "NOT 5v Power" with the same connection that standard version of the image.

- You could look and reprar this ruling.

CAS2 I have this test,
Attachment 336543

Hi all,

If it is 2K79X Motorola 9S12DG256 then pls connect the 5V to XIRQ pins. If 112pins then 56pin and if 80pins then 40pin.

Connection 112pin:
+5V 56pin
GND 14pin
BKGD 23pin
Reset 42pin
RXD0 89pin
TXD0 90pin

Connection 80pins:
+5V 40pin
GND 10pin
BKGD 15pin
Reset 30pin
RXD0 63pin
TXD0 64pin

Pls let me know this solution works or not.

Regards,G

**Samic** · 28th October, 2015, 10:26 AM

Originally Posted by gopelhu

Hi all,

If it is 2K79X Motorola 9S12DG256 then pls connect the 5V to XIRQ pins. If 112pins then 56pin and if 80pins then 40pin.
Connection 112pin:
+5V 56pin
GND 14pin
BKGD 23pin
Reset 42pin
RXD0 89pin
TXD0 90pin
Connection 80pins:
+5V 40pin
GND 10pin
BKGD 15pin
Reset 30pin
RXD0 63pin
TXD0 64pin
Pls let me know this solution works or not.
Regards,G

mate,from your connection line is not right.you can refer to the standard connection diagram as follow:
this connection diagram will add to next version

1.jpg 2.jpg

**CryptoKey** · 28th October, 2015, 02:09 PM

I am left with the customer, for tomorrow afternoon or Friday afternoon.
@Samic @gopelhu .. Have to raise both legs MCU? It is very similar to Xprog, is it possible?
@ Samic, This MCU is securely. the jump is the VVDI?

**gopelhu** · 28th October, 2015, 10:58 PM

Originally Posted by Samic

mate,from your connection line is not right.you can refer to the standard connection diagram as follow:
this connection diagram will add to next version

1.jpg 2.jpg

Hi bro,

My pinouts as the normal programmer ( Like upa or xprog...etc ). VDDX2 equal to the XIRQ pins.

The renault megane has uses as the same processor 9S12DG256 and other cars, but I read all 9S12DG256 processors with my pinouts....

Regards,G

**Samic** · 29th October, 2015, 04:30 AM

Originally Posted by gopelhu

Hi bro,
My pinouts as the normal programmer ( Like upa or xprog...etc ). VSSX2 equal to the XIRQ pins.
The renault megane has uses as the same processor 9S12DG256 and other cars, but I read all 9S12DG256 processors with my pinouts....
Regards,G

Yes,maybe this type can use XIRQ as the VSSX2,get the chips data.but the standard power supply pin is the VSSX2 of processor 9S12DG256.
you can see this follow photos,the last one is the Recommended PCB Layout for 112LQFP Colpitts Oscillator

3...jpg 4...jpg

**gopelhu** · 29th October, 2015, 07:07 AM

Originally Posted by CryptoKey

I am left with the customer, for tomorrow afternoon or Friday afternoon.
@Samic @gopelhu .. Have to raise both legs MCU? It is very similar to Xprog, is it possible?
@ Samic, This MCU is securely. the jump is the VVDI?

If the 2K79X has the CAS module, then 100% securely.

I wrote one wrong thing. Not a VSSX2 but VDDX2 equal with the XIRQ pins. Sorry again....

Regards,G

**Samic** · 30th October, 2015, 10:34 AM

VVDI PROG The Latest V3.9.2 version update

-------------------------------------
v3.9.2 (2015-10-30)
* This version DON't need update firmware
+ Add CAS2 Version2 connection diagram
+ Add PCF79XX connection diagram
+ Add MC9S12XEQ384,MC9S12XEG384, MC9S12XES384 options in <2-MCU>--><Motorola>Mask (2M25J,3M25J,0M12S,1M12S)
+ Add MC9S12XEP768 options in <2-MCU>--><Motorola>Mask (4M48H,5M48H,0N35H,1N35H)
+ Add MC68HC05X32,MC68HC705X32 series Mask (0D62J,1H52A,0D69J,1D69J,2D69J) (need the MC68HC05X adapter)
* Fix MC9S12XE series ID read problem
* Fix MC9S12XE series EEE write problem
* Change Audi J518 connection diagram

5.jpg 6.jpg

Notes:1. 3.9.2 version software include PCF79xx connection diagram show parts as above.
2.copy this link to google chrome/firefox bowers and download.

**CryptoKey** · 30th October, 2015, 01:11 PM

I could not read the MCU, in any way, VVDI-prog indicated ID0000 in V3.9.1, rosfar said "pinned error" with xprog have not tried to read. think it must be some erro of identificancion MCU, try to get one of segundamano to leave doubts and do the tests.
VFDI did not read flash EEP or by OBD2
In the end I managed to add key directly from CAS2 connector with cables DB29 of FVDI.de this way all Ok.

indicated that this CAS2 or there is a problem or I had something exceptional with this, clarification would not be a bad error.

greetings and thanks to all, I hope you assist you very soon.

**insomnia2009** · 30th October, 2015, 08:25 PM

whats your fews on this programmer how about 9s12 with mask 1l15y anyone try and does anybody recommend i have vvdi 2 so far mixed results

**garagetech** · 31st October, 2015, 10:17 AM

Where do we get this pcf79 adaptor from ?

**paul_12345** · 31st October, 2015, 12:35 PM

Originally Posted by garagetech

Where do we get this pcf79 adaptor from ?

The pcf79xx are locked and I doubt this unlocks them - it would be amazing if it can read a locked pcf

This will more likely be copied from orange 5, so it will erase write and read (once erased/unlocked)

**exSPEEDyTOR** · 31st October, 2015, 01:52 PM

Originally Posted by CryptoKey

I could not read the MCU, in any way, VVDI-prog indicated ID0000 in V3.9.1, rosfar said "pinned error" with xprog have not tried to read. think it must be some erro of identificancion MCU, try to get one of segundamano to leave doubts and do the tests.
VFDI did not read flash EEP or by OBD2
In the end I managed to add key directly from CAS2 connector with cables DB29 of FVDI.de this way all Ok.

indicated that this CAS2 or there is a problem or I had something exceptional with this, clarification would not be a bad error.

greetings and thanks to all, I hope you assist you very soon.

HI. when rosfar ask: "do you check pin test?" you click YES or NO? when I try read cas2 with 2K79X, I have some error to. When rosfar say "do you check pin test - I click "NO" and read is succesfuly. I do this 2 times in 2 cas2. when I clicked "NO", I was afraid to lose the dump.

**exSPEEDyTOR** · 31st October, 2015, 02:06 PM

Originally Posted by Samic

VVDI PROG The Latest V3.9.2 version update

-------------------------------------
v3.9.2 (2015-10-30)
* This version DON't need update firmware
+ Add CAS2 Version2 connection diagram
+ Add PCF79XX connection diagram
+ Add MC9S12XEQ384,MC9S12XEG384, MC9S12XES384 options in <2-MCU>--><Motorola>Mask (2M25J,3M25J,0M12S,1M12S)
+ Add MC9S12XEP768 options in <2-MCU>--><Motorola>Mask (4M48H,5M48H,0N35H,1N35H)
+ Add MC68HC05X32,MC68HC705X32 series Mask (0D62J,1H52A,0D69J,1D69J,2D69J) (need the MC68HC05X adapter)
* Fix MC9S12XE series ID read problem
* Fix MC9S12XE series EEE write problem
* Change Audi J518 connection diagram

5.jpg 6.jpg

Notes:1. 3.9.2 version software include PCF79xx connection diagram show parts as above.
2.copy this link to google chrome/firefox bowers and download.

Samic Hi!) can I use this adapter from X-prog in VVDI to read MC68HC05X? Thanks2015-10-31 16-03-35.JPG 2015-10-31 16-03-51.JPG