VVDI PROG

[KILL_THE_IMMO]

I READ IT with mtrk so mcu is fine

[taxo1965]

Hello.MC9S08DZ60 chevrolet,VVDI Prog does not read correctly.Please correct.Thanks

Later, I'll read Orange 5 and lay out

[kluczbum]

Ews4 read ok

[taxo1965]

W169 A KLASS 2007 EZS read eeprom bad
Reat VVDIprog V4.70\71 V1 (ST12)

[drugowaz]

I think something with your tool or cable bdm
Dz60 reads good tested on cim.
But it reads 2 separate areas of eeprom thats why its not accept your dump.
Im telling you 100% because ive done antara immo box too.
You must make one eeprom of both you read and just than load file.
Orange reads whole dump instantly immo hpx.
St12 also never was problem

[taxo1965]

Hello.Why does she read in this format?It is necessary to manually transfer the bytes to the normal format.Thanks

[nazz2]

What is the correct procedure to read+write range rover kvm 9s12? i pressed read id, then read dflsh+pflah+pof, but what is the reset security botton for? if you press it ,it comes up with loosing data warning ,are you sure? and then seurity unlock, the guy from mart tool puts fe to write to the mcu, a bit conusing a proper procedure, is greatly apreciated.

[rob h]

Here is a vid, in the middle, there is the xprog procedure displayed. Steps how to work with secured mcu. (JLR KVM unlock)
It might clearify things, https://www.youtube.com/watch?v=quyxHyV_UWc

[nazz2]

Better explanation on this video, in comparison to the chinese vvdi videos , so correct me if i am wrong , if the vvdi detects secure /locked 9s12, it has to be unlocked first, i think the warning with regards to the"data deletion" when unlocking the mcu probably it refares to the securty data!! also no explaton when unlocking the mcu with vvi , they write "FE", a bit more relived now thanks.

[drugowaz]

Theres no more to clear. If its secured you go trough reset security. Get sec bytes,after write set security with bytes given when read. Its same as you would done bmw or porsche secured mcu.

[darkoman]

Hi! Can somebody provide link for V4.7.2 ?

[Maartinj]

Hi! Can somebody provide link for V4.7.2 ?

https://mega.nz/#!BRUmTCiD!NR-5ppntp...R68lKh-PfA/url

[darkoman]

https://mega.nz/#!BRUmTCiD!NR-5ppntp...R68lKh-PfA/url

Thank you Maartinj, but link you provided opens download for
VVDIProg4.7.1 .rar

[sv2hqx]

Hi! Can somebody provide link for V4.7.2 ?

Updater from is working
You can update from application
Actually....... where do you see 4.7.2??

[darkoman]

Updater from is working
You can update from application
Actually....... where do you see 4.7.2??

Here it is...