FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386

[Pali33]

someone any idea?
after ERASE the Galletto still working and blank check=device is not blank.
CRP level = 2 or 3
I have try on 3 different notebook with Win XP, Win7 and Win10. Always the same result.
I have try both flash utilities (Philips and Flash magic) and different baud rate.

Should i try another USB-TTL adapter? (now i use TTL adapter with PL2303 chip)
any suggestion please.

[motorbike59]

hello fantomel I bought from a few days a fg galletto v 54 clone, the first attempt to try it in writing was blocked, I turned it off and made to repair the software and blocked the software with gray windows inactive, I have made a lot of attempts reinstalled the installed software the fixes I changed pc I tried on xp and on win 7 but nothing always blocked sometimes if I turn off the pc and reigning the next day you activate the software for a few seconds after you hear the noise turn off a relay in the hardware cock and again all gray give me a hand please what advice I thank you in advance and sorry for the trouble

[XJTAG]

hello fantomel

please i need your help , if i can use this files for my galletto2 eu V48, with this pcb http://xprogx.ru/index.php?content_page=31

[flashit]

Is here somebody, who is selling reworked Gallettos?

Bought a China Clone, and after that, I read all the stuff here....

Which one is the newest, or the best for MED17.2 ECU?

v54 0485? but reworked?

[valery72550]

Errors

The following errors occurred with your submission

• toms4 has exceeded their stored private messages quota and cannot accept further messages until they clear some space.

Please don't spam topic regarding pass, you have PM for this. Don't force me to ignore requests from topic.
ONLY PM

password cvp

[gas43]

I have quality eu v48 pcb,
Is it possible to program to 0475?
Is it worth trying?

[carmageddon]

I have quality eu v48 pcb,
Is it possible to program to 0475?
Is it worth trying?

not possible, HW different

[Surround]

Is here somebody, who is selling reworked Gallettos?

Bought a China Clone, and after that, I read all the stuff here....

Which one is the newest, or the best for MED17.2 ECU?


v54 0485? but reworked?

Hello,

Was looking for the same thing. Guy is known on another place and seems legit. Check by yourself.

Not sure links are allowed, i sent you a pm...

Cheers...


Sébastien.

[joker01]

guys if I understand correctly 0386 or 0475 is the firmware of the micro.e you can do update or change the pcb ???
0386 is ok on sw china,0475 is ok on sw eu....

[morgano]

not possible, HW different

This is not 100% accurate my friend

[carmageddon]

This is not 100% accurate my friend

v48 is 100% not possible to use with fw from v53...this is reality because the hw is totally different...if you want to reprogram lpc you can (if you know how on v48) but the functionality from v53 are not available on hw v48

[morgano]

v48 is 100% not possible to use with fw from v53...this is reality because the hw is totally different...if you want to reprogram lpc you can (if you know how on v48) but the functionality from v53 are not available on hw v48

Is possible use 90% of v53 functionality, just jtag not possible because obviously hw is missing.

But full working OBD, and BDM updated support to v53 is possible.

[gas43]

This is intresting! I have v48 eu pcb (software of that does not open), but I can not find the firmware (v48) to program again. Can anyone help me to find v48 hex and fix tool?

Otherwise I will try with 0475 fantomel...

[gas43]

guys if I understand correctly 0386 or 0475 is the firmware of the micro.e you can do update or change the pcb ???
0386 is ok on sw china,0475 is ok on sw eu....

Yes, update the firmware to 0475.
0475 is more clean and stable, in combination with a rework pcb (Armageddon΄s list, few pages back)!!

[joker01]

ok then pcb changes from v48 to v53 / 54. anyone has a picture of 2 pcb ??