Everything Carprog...

[PierreTheron]

Hi everyone carprog 8.21 clone will it read newer ford airbag modules through obd2 or on bench I try on bench it will connect but when it get to read it has communication error so my question is am I doing something wrong as im thinking it only works online thanks for any input

Specify newer airbag module , maybe year model and part numbers i think ...

[FxShaw]

So carprog software 10.13 got some new changes but one big change is the removal of the eeprom tab when doing airbag/dash as its easier for me to load files or save direct.
Is this a issue for anyone else?

[Plowman]

Hi, Can anyone tell me if clone CarProg will do Ford Focus III (2015MY) via OBD?

[AUTOREPAIR1]

Specify newer airbag module , maybe year model and part numbers i think ...

Sorry I should have put that info!!!
2015 ford f350
dc3t-14b321-dc
also I have not tried with internet connected thanks again

[FxShaw]

Hi, Can anyone tell me if clone CarProg will do Ford Focus III (2015MY) via OBD?

if its airbag you are talking about then no. cannot be done obd. module have to be out to read eeprom.

[Plowman]

if its airbag you are talking about then no. cannot be done obd. module have to be out to read eeprom.

Thanks for the reply......Sorry I meant Dash :-)

[flamurf]

hello friends,

i need a firmware flash 5.31 and the lib for flash my carprog.


thanks

[tango]

there is no fw flash for 5.31

only fw files available are fw4 (old sw4.01), fw for 4.74 (for sw 4.74) fw 8 (for sw 8.21)
this is all

[flamurf]

can u send me the fw for 4,47 and 8,21

[tango]

they are here in the forum probably in this thread

[kennyspark8574]

Hi, I have carprog 7.28. Can this be updated to online version? I have all firmware versions and lib files. could someone please help me how to update this. will happily pay or give something in exchange. Many Thanks

[tango]

all the info is in thread carprog reflashing step by step or something like this

[j0anita]

I bought Carprog Clone with fw4.01.

Tests: A9 only - all ok
A9+D1 - no response from unit

Some functions work and some don't (24cxx and "no response from dash" errors). I read that if I upgrade at least to 4.47 it will work fine. Is that true?

I have one repair kit with HC125 to replace, but i don't know if it's needed since A9 test is all ok.

Looking for advices.. thanks

[mrchip]

I have exactly same pcb like as yours
why our carprog dont have an cap like as others ? see pic

[j0anita]

I just ordered a J-Link Programmer. I'll upgrade to fw8.21 and see what happens.