Everything Carprog...

**kostelectronics** · 25th April, 2018, 09:50 PM

I think it's the only option i have. Because i compared the one and only Dump which is available in the Internet and it does not fit to the capacity of the AT88SC (it's way too short). I tryed to program a brand new AT88SC25616C with Beeprog+ and it's working.

We need the password from the chinese guys who programmed this IC to read it's content, but i don't believe they share with us. Does anybody have contact to the manufacturer of carprog clones?

The only solution is to contact dspcrack.com, it's a reverse-engineering company who cracked the security of this IC and can read all the contents and give the password. I ask for the fees to do this job. Mabe we all can collect money, dump one good AT88SC and sell the dump for others wo have the same problem?!

Otherwise, buy a new carprog..

What do you all think about this idea?

BR Matthias

**vaicekas** · 26th April, 2018, 08:05 AM

Hi,
try contacting Serg2000 from the Russian speaking forum. He writes:
Firmware Carprog 10.xx (crypto memory is no longer needed)
Hello. I built the firmware for the work without cryptoeeprom but it is possible and with it.
The new firmware includes a full package of airbag2015 and Fujitsu processors, and of course everything else that was
Price 50 usd
The principle is interesting for those who have a crypto eeprom its dead.
As I said in the topic of carprog - Online not work and not yet (there is no time but by fall I'm still hugging myself, but I can not promise anything), the firmware is really lapped from the tenth version, but it's necessary to run versions before the ninth so that the airbags do not climb online. Fujiki can be used from the tenth and higher.

**autodigitec** · 26th April, 2018, 11:49 AM

Originally Posted by vaicekas

Hi,
try contacting Serg2000 from the Russian speaking forum. He writes:
Firmware Carprog 10.xx (crypto memory is no longer needed)
Hello. I built the firmware for the work without cryptoeeprom but it is possible and with it.
The new firmware includes a full package of airbag2015 and Fujitsu processors, and of course everything else that was
Price 50 usd
The principle is interesting for those who have a crypto eeprom its dead.
As I said in the topic of carprog - Online not work and not yet (there is no time but by fall I'm still hugging myself, but I can not promise anything), the firmware is really lapped from the tenth version, but it's necessary to run versions before the ninth so that the airbags do not climb online. Fujiki can be used from the tenth and higher.

serg2000, the guy who scammed shittons of people including me for carprog 8.xx "online" mcu without tokens counter... Yeh, online never works and few weeks later counter starts appearing to everyone and no one ever hears about him again until he has something new to sell..

Or is he giving that firmware to the people he scammed? That would be decent.

**wazimx** · 5th May, 2018, 11:57 PM

Hi guys, in desperate need of some help laptop crashed.
Could some 1 please help me with carprog v10 clone software. laptop crashed and i lost all my software
Would appreciate if some1 could help.
Thanks in advance.

Wazimx

**elremont** · 6th May, 2018, 08:34 AM

please upload 8.21 firmware.
I download from post 3,but get error archive is damaged.

**Kocta** · 6th May, 2018, 12:25 PM

Here you are

**elremont** · 6th May, 2018, 01:39 PM

thanks friend

**xlinuxasx** · 25th May, 2018, 03:00 PM

Hello, I try to connect carprog to pc via usb cable, but nothing happens. I tried new usb cable, but still when I connect it, nothing happens. Where shoud I look for problem?

**Manta1600** · 31st May, 2018, 12:22 AM

I have new carprog 10.05 PCB looks like CAR003 - today I try but I can't read EEPROM 24Cxx

also Today try to connect to Zafira B 1.9cdti without success

I can't open A1 cable

I never used before carprog - may be I missing something or must do some modification?

Thanks

**mikroel** · 31st May, 2018, 12:32 AM

Originally Posted by Manta1600

I have new carprog 10.05 PCB looks like CAR003 - today I try but I can't read EEPROM 24Cxx

also Today try to connect to Zafira B 1.9cdti without success

I can't open A1 cable

I never used before carprog - may be I missing something or must do some modification?

Thanks

Already explained many times before.
Main unit carprog chinease clone must be repaired as well A1 adapter .

Sent from my iPhone using Tapatalk

**Manta1600** · 31st May, 2018, 02:02 AM

I will repair the unit

my version is 4.01 is it necessary to change it to 8.21 ?

Thanks

**dimmak22** · 31st May, 2018, 10:23 AM

is there anythink for 9.31 version?

**Manta1600** · 31st May, 2018, 04:35 PM

I just opened my CP and saw that inside there already are 4 pcs - 74HC125D, 3pcs NXP and 1pcs Philips - do I have to change them or can I just make other modifications?

IMG_20180531_000409.jpg IMG_20180531_000556.jpg

my hardware version is 4.01 which software version is better for this?

My A1 cable already have capacitors on C8 and C9 - do I have to change them to titanium ? or must I make only other modification?
also on picture can see black wire - do I have to remove it?

IMG_20180531_101026.jpg

Thanks

**nexusjose** · 31st May, 2018, 05:05 PM

Originally Posted by Manta1600

I just opened my CP and saw that inside there already are 4 pcs - 74HC125D, 3pcs NXP and 1pcs Philips - do I have to change them or can I just make other modifications?

IMG_20180531_000409.jpg IMG_20180531_000556.jpg

my hardware version is 4.01 which software version is better for this?

My A1 cable already have capacitors on C8 and C9 - do I have to change them to titanium ? or must I make only other modification?
also on picture can see black wire - do I have to remove it?

IMG_20180531_101026.jpg

Thanks

In A1 the problem are R or C are interchange look your item

Enviado desde mi iPhone utilizando Tapatalk