I have a clone version v9.31 and for airbags it can read the chip but it reams when I want to erase the crash, normal or not?
I have a clone version v9.31 and for airbags it can read the chip but it reams when I want to erase the crash, normal or not?
How i can read thes module air bag for Renault symbol
Can i read by carprog. And how to do?
Sent from my VTR-L29 using Tapatalk
abdullah esam (12th January, 2018)
Hey to all.
I'm trying to read Honda 95640 in a adapter board. I have 8.21 and 7.24 units, tried many different softwares but no success.. Chanced original 125d to texas 74hc125m, 47 cap on place, 2.2 SMD's chanced to normal resistors etc. First without any mods to the board it red the eeprom fine but verification failed every time.
With this current setup, windows 7 blinks all the time that something is connected and disconnected very rapidly. Doesn't work at all. What to do next??
Any help would be great.
Thanks.
I have upgraded my carprog 4.01 to 8.21 with FxShaw files.
Works perfectly without replacing 74hc125.
Thank you FxShaw.
FxShaw (5th January, 2018)
150428CAR00577RU
Yes it does work .
Tested on Renault Megane 3 285581365R
not work Original carprog not read obd SRS toyota renesas mcu!
Hello to all. I have carprog10.05 but no unlock options im mcu programming, transpoder, airbag some options are n/a some are ok. Is 8.21 better or it is the same story?
Last edited by PSAcars; 19th January, 2018 at 11:27 AM.
IF I HELPED YOU PRESS THE " T " BUTTON
Your carprog is version 4.01. Therefore, many points will not work.
You need to write firmware 8.21 to Your carprog, and use 8.21 software
hello, thank you, the seller told me that is 10.0.5. Do we have here i DK good working dump dor 8.21
Sent from my Lenovo A6020a46 using Tapatalk
IF I HELPED YOU PRESS THE " T " BUTTON
Bookmarks