Everything Carprog...

[Kocta]

https://cz.mouser.com/ProductDetail/...WDEm5Bdbbzog==

[tomas1991]

I replaced kit with 74hct125m, mcp, tantal capacitors and quartz but is the same problem... Anyone have a idea? I checked on 4.01 soft version too - the same as firmware in atmel - but don't help. I try with and without 102 smd resistor in a1 pcb between can l and can h- the same. KF 50 ? Maybe 4.01 fw dont have CAN funxtions? A1 pass the test plugged in car and without pluged into OBD.

[remolyy]

https://uk.rs-online.com/mobile/sear...hTerm=74HCT125

Can somebody advice ones from this list. Thanks.

[krislanders]

Yes... I have many times & after done flashing you would have to replace HC125 to HC125M as marked in step 4..Other wise it will never actually write to anything.

Adding Carprog Antenna Fix.. Thanks to PierreTheron for the Info.


CarProg 8.21 included with lib, exe, firmware with no activation needed. Extract 4 zip and then open zip file and extract.

Lets not forget that there is a Thanks & Rep button, Feel free to use it .

if anyone can help me i m dowloading but can not extract... please help me

[tomas1991]

ok on 8.21 fw work CAN alright great thanks

[M0rtuuS]

Hi, I have a question.

I want to find pin and add a key to my VW Up 03/2013. I'm looking for a clone of some sort to keep the cost down, since i'm not running a shop.
Is a carprog clone able to do this through OBD? Or only by dumping the 9S12X?

Or do you have any other suggestions of tools that work for at most 50-100 euro. Tools that I own are a legit VCDS microcan and a clone Zedbull.

Thanks,

[Kocta]

Only ODIS online. Clone of the impossible.

[fixanycar]

Only ODIS online. Clone of the impossible.

Not 100% true
Depends on type and Model
I just made and programmed AKL flip key TFT 2014 Passat

[Kocta]

Not 100% true
Depends on type and Model
I just made and programmed AKL flip key TFT 2014 Passat

You are courageous to go with a clone on such a car.

[badziewo]

I have reset some SRS modules this week.
2 of the modules did NOT clear properly - wrong area of eeprom was cleaned
1 - Nissan Rogue 98820 JM60A - 93c66
2 – Ford Focus 8M5T 14B321 BF – 95160
I have used modified carprog with 150428CAR00577RU firmware.
Can this be corrected?
Thanks

[FxShaw]

I have reset some SRS modules this week.
2 of the modules did NOT clear properly - wrong area of eeprom was cleaned
1 - Nissan Rogue 98820 JM60A - 93c66
2 – Ford Focus 8M5T 14B321 BF – 95160
I have used modified carprog with 150428CAR00577RU firmware.
Can this be corrected?
Thanks

Only with original since they now store all the data online and does the correction online. you can always clear manually and use cp to write..easy and done.

[nbn]

Hello
I need help for my carprog 8.21.it work great for can line but not for k line I try another carprog 9.21 with some a1 but it the some problem reading but with errors.in the a1 the pin 7 is connected to carprog pin 11 .with tester there are continued.thanks

[benyunes]

Hi
Carprog clone give me (Device locked) as shown in fig .what can I do to open it?
I think firmware 4.01 and serial number 081105CAR001773I
and how I can upgrade software v5.94 to 8 , 9 or 10 (if possible)
Thank you

[FxShaw]

Hi
Carprog clone give me (Device locked) as shown in fig .what can I do to open it?
I think firmware 4.01 and serial number 081105CAR001773I
and how I can upgrade software v5.94 to 8 , 9 or 10 (if possible)
Thank you

Timer ran out.. Check post #3 have the files to upgrade to v8 with unlimited timer that never run out.

[badziewo]

Is it possible to read Nissan Murano airbag module infineon processor with clone carprog by OBD?
Thanks