>>>>>>Autohex II Support Thread<<<<<<<

[thebigk]

I have a customer ask me to help him with coding F30 328i BMW - he had Xenon, and now has Halogen installed. Another guy was using NCS expert and removed 524 for adaptive and now told him he needs to flash the "halogen data" to the car.

Anyway, I am wondering if Autohex can help me with this problem?

[roth18]

Got a software expired in my Autohex. Does anyone know what works and what does not after the software is expired? I didn't use it for a while. Got BMW Explorer, software never expires and it is a bit better for my purposes. So, I'm considering dumping Autohex for it.

I got a E93 Autohex gives message -> Series not supported, Reference:8104, BMW Explore no problem. I don't know if this is due to expired software or Autohex does not support E93 in general.

[Levanime]

i dont think its expiration problem,

Subscription and online connection is needed for ISN and Key related works

for that problem, it would be better if you contact their support, they are very responsive

[decno1]

@Roth18:
If your device serial number 53818XXX8, then here are some statistics of what I could find in our server:
- You have used online ISN 46 time (more details with dates are available upon request), last time you have used it on 2016-12-17
- You have used online flashing of 62 different VIN ( we don't want to go in details for each VIN how many ecus were programmed), last time have been seen on 2017-01-20 (but server rejected it)
- We don't know how many other offline ISNs you made during your usage of Autohex.
- We don't know how many times Tricore ISN boot mode you have used.

If we make a simple calculation for Online services only: 62+46=108, so average cost is only 6.9 USD per usage. You could use it much more, the rate will be much less.

Anyway, you can renew Autohex II at only 350.00 USD if you don't need online programming, all other functions (ISN online, CAS firmware,....) will keep running.

[decno1]

@thebigK
NCS expert cannot modify F30 FA, I guess they used E-Sys, You can easily modify the FA by Autohex II ( I don't know if the 524 is correct to be added/removed or not), and then you can flash/encode the affected ecus.

[roth18]

@Roth18:
If your device serial number 53818XXX8, then here are some statistics of what I could find in our server:
- You have used online ISN 46 time (more details with dates are available upon request), last time you have used it on 2016-12-17
- You have used online flashing of 62 different VIN ( we don't want to go in details for each VIN how many ecus were programmed), last time have been seen on 2017-01-20 (but server rejected it)
- We don't know how many other offline ISNs you made during your usage of Autohex.
- We don't know how many times Tricore ISN boot mode you have used.

If we make a simple calculation for Online services only: 62+46=108, so average cost is only 6.9 USD per usage. You could use it much more, the rate will be much less.

Anyway, you can renew Autohex II at only 350.00 USD if you don't need online programming, all other functions (ISN online, CAS firmware,....) will keep running.

It would be also nice to have coding / programming option how much 4 that and how to update?

Sorry to ask but could not find info on the official site or in tool software.

[PremierD]

That's a job for PM mate ...

[roth18]

That's a job for PM mate ...

K boss, understood.

[infotech]

@thebigK
NCS expert cannot modify F30 FA, I guess they used E-Sys, You can easily modify the FA by Autohex II ( I don't know if the 524 is correct to be added/removed or not), and then you can flash/encode the affected ecus.

hey
decno i need to remove rdc from e60
how can i do that using the fa editing
i need to remove the tire pressure light from cluster
how do i deactivate the rdc module i have tried few attempts,i think im doing something wrong

2004
530i
e60

also we need functions like reading isn from 8hp transmissions we are having a big problem
bmw explorer is already displaying on their websites function will be soon released, including reading data from FEM module

when will autohex have solution to 8hp

[Levanime]

you need to disconnect module (in trunk, under spare wheel)
then remove option 2VB from FA
then you need to code: KOMBI, DSC, CAPPL/MASK

[decno1]

Thanks to Levanime for his answer.
8HP (as well as bdc and fem) still need time to be done.
We have the solution but we need time to make the solution applicable.

[infotech]

you need to disconnect module (in trunk, under spare wheel)
then remove option 2VB from FA
then you need to code: KOMBI, DSC, CAPPL/MASK

thank you very much!!
i will do that and report.

[thebigk]

I was told that with autologic you cannot flash a new FRM3 module, this is for 2010 BMW X5 M 4.4i

I am wondering if auothex can do the job?

Thanks

[makz]

I was told that with autologic you cannot flash a new FRM3 module, this is for 2010 BMW X5 M 4.4i

I am wondering if auothex can do the job?

Thanks

I did with autologic on e70 x5 couple times. All went well. Programming and coding

[decno1]

@thebigk
FRM is just an ordinary module, nothing special in the flashing and coding.
It will be great to ask who told you, what is special in this module?