VVDI 2 new tool arrived

[gilahish]

Hi, i'm trying to make subaru G key, i can generate keys from eeprom dump but my problem is adding a second key, everytime i generate new file in immo tool it looks like it changes the other keys, does it make sense?

[yugo45]

Can anyone tell till what year we can rear eeprom and do keys for Audi A6/Q7 with J518 ?

I see in some old update something that can damage Eeprom when read , so they add some message:

"VVDI2 latest software version V1.2.5 update

2. Add identification for new A6/Q7 J518(this type not support read via OBDII), avoid damage J518 when you read EEPROM via OBDII"

http://www.digital-kaos.co.uk/forums...=1#post2899574



Thanks

I think after this version I could read a central for obd.

Enviado do meu SM-G935F atrav?s de Tapatalk

Are you saying any A6/Q7 till 2011 is safe to read eeprom , basically that was my main question ?
I have done some 2006-2008 but never had chance to do 2009-2011. So I was wondering how safe is to do 2009-2011 models.
Thanks

[LauAlf]

Are you saying any A6/Q7 till 2011 is safe to read eeprom , basically that was my main question ?
I have done some 2006-2008 but never had chance to do 2009-2011. So I was wondering how safe is to do 2009-2011 models.
Thanks

What I did was from 2006,
But I set up a 2010 one if I'm not mistaken, got married to the car and took out component protection.

[dd1]

Hi everyone. I have done a Mbz w204 ELV repair and no it shows notPersonalized or TP unticked. What's my other option? I'm using vvdi2 mb. I have not done a EIS renew because the version 2.1.7 should do it without that. Before had "fatal error" in ELV. Help plzzzzzzzzzz. Thnx in advance

[yugo45]

Hi everyone. I have done a Mbz w204 ELV repair and no it shows notPersonalized or TP unticked. What's my other option? I'm using vvdi2 mb. I have not done a EIS renew because the version 2.1.7 should do it without that. Before had "fatal error" in ELV. Help plzzzzzzzzzz. Thnx in advance

You are in wrong thread.
Here is MB VVDI:
http://www.digital-kaos.co.uk/forums...DI-MB-BGA-TOOL

[LauAlf]

I'm trying to use PassThor for Odis 6.2.2, worked with a VVDI2 but with the latest upgrades.
Anyone else with the same problem?

[neverquiet]

How can I program a key from dealer to 750li 2006 with vvdi2 BMW?
Is it just to enable the key?
Please advise!

[rola1971]

How can I program a key from dealer to 750li 2006 with vvdi2 BMW?
Is it just to enable the key?
Please advise!

yes
if it new key

[yugo45]

How can I program a key from dealer to 750li 2006 with vvdi2 BMW?
Is it just to enable the key?
Please advise!

Key for Dealer is ready to go, it will start car no need to do anything.

[dorofteius]

So .
B6 all key's lost worked perfect by bcm dump, in to the Transponder key programmer , immobilizer data tool.
So, good tool at the end.
Too bad, that allot of algo's from imobilizer data tool do not work.

[bigkey]

Hi Guys, yesterday I have problem device cannot connect to the car. Even ignition was ON, I keep getting the message "Turn ignition ON and try again"
Just wonder if I did anything wrong? Any suggestion would be appreciated.

[amigokola]

What car ?? Other device connected good ??

Hi Guys, yesterday I have problem device cannot connect to the car. Even ignition was ON, I keep getting the message "Turn ignition ON and try again"
Just wonder if I did anything wrong? Any suggestion would be appreciated.

[rola1971]

Hi Guys, yesterday I have problem device cannot connect to the car. Even ignition was ON, I keep getting the message "Turn ignition ON and try again"
Just wonder if I did anything wrong? Any suggestion would be appreciated.

hi
may be you try in vw golf 6 all key lost?

[Maartinj]

So .

Too bad, that allot of algo's from imobilizer data tool do not work.

continuous improvements

[PremierD]

So .
B6 all key's lost worked perfect by bcm dump, in to the Transponder key programmer , immobilizer data tool.
So, good tool at the end.
Too bad, that allot of algo's from imobilizer data tool do not work.

Moan , moan ,moan ...............