VVDI 2 new tool arrived

[muskatas]

I've used the try start method many times. Once you have a working key using this method you can get the isn too.

Did it worked? You have tried crypted or uncrypted version? after making working key, do you need write back new cas eeprom data to cas?
I know about ISN showing is lie. Im talking about 16 or 64 tries does it works or not.

[truedetective]

Did it worked? You have tried crypted or uncrypted version? after making working key, do you need write back new cas eeprom data to cas?
I know about ISN showing is lie. Im talking about 16 or 64 tries does it works or not.

No you don't write back - just follow on screen instructions. I've done both the 16 and the 64 tries depending on cas version. Crank the engine if it doesn't work put it back into vvdi press the button and then put it back in the car crank and repeat until you find the one that starts the car, press the button to say it starts and out pops the correct ISN.

[exe123]

Finding the 7th byte, it is still not working.
Key tool, find 7th byte from working key stops after seconds!

Found that too. Reported it to Samic. It is just the application that is hanging. In the background it is scanning. Just leave it and it will come back with found byte later (or not)

[yugo45]

Finding the 7th byte, it is still not working.
Key tool, find 7th byte from working key stops after seconds!

Found that too. Reported it to Samic. It is just the application that is hanging. In the background it is scanning. Just leave it and it will come back with found byte later (or not)

If you use menu key learn Immo 4 , Passat B6,CC ,It will find 7 byte, this menu works OK.

[malken]

I'm sorry to write through an interpreter. I tried to prescribe the vvdi key to the Peugeot 407. pin code read vvdi2 but the key cooked differently and did not register. the radio channel does not work. At the same time Kd mini and their key is registered and everything works. when it is finally done remote vvdi? !!!!!!

[Brat]

can someone confirm it is work add key in vvdi2 cas3 and cas3+ from "imobilizer data tool" ?
its remote work?

[dorofteius]

Yes working good .

[CaioW]

Fake info, sorry!!!

[BRMTDI]

If this is true very excited

[Samic]

https://www.facebook.com/permalink.p...52700361409294

Thanks for all users feedback, this news not true.
we are still working on new update, but even next new update cannot support all listed models.
about the exactly update please wait for new update released and refer to the update information.
xhorse team always try our best to update.

[CaioW]

Thanks for all users feedback, this news not true.
we are still working on new update, but even next new update cannot support all listed models.
about the exactly update please wait for new update released and refer to the update information.
xhorse team always try our best to update.

Sorry about that!

I always trust on that page.

My mistake.

Long life Xhorse Team!

[WRX 14]

Hi, i'm thinking of buying the VVDI2 (full soft) and VVDI prog.
I notice there are 2 authorisation options for ID 48 cloning, the VAG48 copy (VV-03) and copy 48 - 96bit (VV-04)

I have a few questions:
1. Will the VVDI2 be able copy ID48 for other manufacturers (Non-VAG) without buying extra authorisation?
2. If i was to buy the VV-04 authorisation will i be able to copy all current 48 chips? or would i also need the VV-03 authorisation aswell. Trying to determine if the VV-04 is an add-on to VV-03 or if the VV-04 also does job of VV-03.

3. Will VVDI2 work with CN5 chips and such like, or only the special Xhorse chips.

Thanks for your time

[WRX 14]

Hi, i'm thinking of buying the VVDI2 (full soft) and VVDI prog.
I notice there are 2 authorisation options for ID 48 cloning, the VAG48 copy (VV-03) and copy 48 - 96bit (VV-04)

I have a few questions:
1. Will the VVDI2 be able copy ID48 for other manufacturers (Non-VAG) without buying extra authorisation?
2. If i was to buy the VV-04 authorisation will i be able to copy all current 48 chips? or would i also need the VV-03 authorisation aswell. Trying to determine if the VV-04 is an add-on to VV-03 or if the VV-04 also does job of VV-03.

3. Will VVDI2 work with CN5 chips and such like, or only the special Xhorse chips.

Thanks for your time

Another question i forgot to add. Do you also need the 48 collector cable for cloning all 48 chips?
Some websites seem to only state the following:

Supported type:
48 chip copy function applies to 4th Immobilizer system, the supported type incl. NEC24C32, NEC24C64,
NEC24C64 color instrument, A1, A3/TT/R8, Q3, new Tiguan 873B, 883B etc.

VVDI2 48 chip copy (no need register condor)
To copy 48 Chip, you need:
-With the 1000 member points on VVDI2, you could use to exchange 48 chip copy function
-VVDI2 has 4th Immobilizer system function
-VVDI2 48 chip data collector
-New 48 Chip
-100 member points for one-time 48 Chip copy


Function:
In the process of coping 48 chip, it requires PIN code and component security bytes from car, you can select any of following method:
1) VVDI2 can read out the PIN code from Engine Control Unit (ECU) via OBDII and CS
2) You have component security bytes and PIN code
It can copy 48 chip, add 48 chip, support 48 all key lost and support smart key.

For MAGOTAN / CC, it can only copy 48 chip with original key, not support 46 chip, smart key and all key lost.


Do you only need this adapter for those specific immo4 units?
Do you also need to spend 100 'member points' every time you copy a 48 chip (on top of buying/exchanging points for authorisation)?



p.s. Merry Christmas everyone

[iamfooser]

I have a Volkswagen Vento (Polo Sedan) with Continental 6RF.920.861 cluster. I believe inside is renasas MCU. Anyway to add key(besides cloning) or do all lost for this car? I will be happy to work with support with this car. I have working keys if support would like to have a look.

[vasa]

I have a Volkswagen Vento (Polo Sedan) with Continental 6RF.920.861 cluster. I believe inside is renasas MCU. Anyway to add key(besides cloning) or do all lost for this car? I will be happy to work with support with this car. I have working keys if support would like to have a look.

this is mqbab platform from 2014.6 and now isnt support mileage and key . Next update maybee have MQBAB but this cluster with low display not support.Key only dealer is not expensive coast 100euro with programin or try cloning