VVDI 2 new tool arrived

[lidons]

*VVDI2 keytool 93c86 Kessys Touareg, Does Not Work, precodes the key incorrectly SK-H SK-L.
*Tango, unknown versión

[u.s]

Thanks mate, operator error this time.
Ended up manually entering the key info into the dump.

[Faraday]

Can you add instrument cluster 2K0920844C version 002 1222 it is from VW caddy 2009 micronas cdc3xxx dash, auto detect does not work.

[LauAlf]

Hello.

All immo on.

Old last vvdi2 working.

Solution edc16u1 make immo off. Flash to audi version. Immo on. Change CS and PIN. Immo off and flash VW version.

Make sure you do not have Immo Off. If you have Immo Off , it will not read any info and will give error.

Enviado do meu SM-G935F através do Tapatalk

[szengen]

checking.......

[szengen]

automatic recognition, only at Sierra's effi​

[szengen]

Unable to make key for 2006 Yaris using VVDI2 Transponder Programmer
Have read data from 93C56A.

Select Asia->Toyota->Yaris->2004-93C56, load dump and get 'Unknown version!' error.

Dump and screenshots attached. (key data and vvdi2 error)

...................
You are a long way before you, before you become a leczczs.rarprofessional
................

[offsystem]

Can vvdi2 also do keyless key mqb ?

[LauAlf]

Can vvdi2 also do keyless key mqb ?

Yes. Tested.

Enviado do meu SM-G935F através do Tapatalk

[amigokola]

Because it is Continental Kessy. You must read it with VVDI PROG and then VVDI2 should recognize dump.

*VVDI2 keytool 93c86 Kessys Touareg, Does Not Work, precodes the key incorrectly SK-H SK-L.
*Tango, unknown versión

[labusas]

Hi, Audi A4 2011, made smart fob but steering light came on and stays on. Never happened before, is this just enough to clear DTC situation or something wrong?

[ghostrider72]

Clear it or drive it around the block. Should go off on its own.

[shotaaa]

Hello can somebody explain how to get "power class" from the ECU ?
Must the power class in the dashboard be the same als in the ECU ?

The car is vw polo 2010 and i must teach a new cluster in the car.

Thanx in advance !

[rob h]

You can get the powerclass by obd.
Type in CS, Mac pin, and the program Will search.
Pwrclass, you could also find by posting enginecode.

[shotaaa]

You can get the powerclass by obd.
Type in CS, Mac pin, and the program Will search.
Pwrclass, you could also find by posting enginecode.

So read thru obd ecu eeprom and flash..calculate cs pin mac.

And after wich option choose to read powerclass? or it will show if i calculate ?