Sure: www.xhorse.uk/issue
Sure: www.xhorse.uk/issue
VW transporter 2017. (My first MQB job)
The working key number is 7E0837202BD
I checked with VVDI2
IMG_20181110_102335_954.jpg
Ok, this is an MQB key (because 7E0837202BD available with ID48 and ID88 )
I didn't have MQB key just a normal 7E0783202AD. The remote programming succes with this key.
Key learn detected VDO NEC 2009+
IMG_20181110_100715.jpg
I selected key learn-> MQB platform and choose continental/VDO and Diag button.
After I push the Diag button the VVDI automatically detect the VAG number: 7E0920970S, Version: H03 1104, Instrument type: 2014.06- NEC+24C64 and threw it to 4th immo system -> 2014.06- NEC+24C64
IMG_20181110_100832.jpg
Ok, read eeprom ->save file -> read immo data -> save file
IMG_20181110_101029.jpg
Make dealer key -> prepare OEM key -> choose the second working key ID (what was lost). succes (with VVDI ID48 transponder).
I tried start the car. Start but after 1s stopped and got an error message: "no key" I tried start again but nothing happend just "no key". I started the car with the original key, works fine and then I can start with the new key until 1s.
I understand that why not working: because I don't have MQB key it is fine but 4th system with MQB key? and the remote works fine with old 7E0783202AD remote (transporter/Amarok)?
My question: Where can I buy the 7E0837202BD MQB key?
If I get the MQB key then Can I programming it to the car?
Sorry for the bad quality pictures
Last edited by Sasika; 10th November, 2018 at 04:00 PM.
amigokola (13th November, 2018)
This is not mqb try on 24/64 after 2014
Wysłane z iPhone za pomocą Tapatalk
if the working key TP recognised as MQB and the key available both UDS and MQB transponder then it looks like a mixed type...
Sir, are you classified as human? Negative, I am a meat popsicle
It wont work with normal ID48.
I understand. I wrote it i just tried something.
copying 48 fiat brava 2007 a mistake, it's the server if it does not go and, because it gets embarrassment,
unknown return data 30200000000000000000000
Last edited by szengen; 10th November, 2018 at 08:30 PM.
fang, Narwalus microcephalus,Spectrum Zx, Atari amiga, Commodore +4
szengen (10th November, 2018)
Audi A7 2016 USA Keyless. Making spare key no problem with VVDI2 ??????
yugo45 (14th November, 2018)
Just got this tool. Trying to read CAS2 on the table 100Kbps no 120 ohm across. Result ---> "Connection Failed!"
Trying with BMW Explorer (same setup). Result ---> OK.
Is there something I need to do for VVD2 to connect, like port setings etc.?
I try CAS3++ with VVDI2 and it connects OK at 1st but then looses connection and odes not connect anymore.
Very weird.
Thank You!
Last edited by roth18; 13th November, 2018 at 07:10 PM.
Best Regards, Roth.
chcp (13th November, 2018)
Sasika (14th November, 2018)
Lol. Nearly dealer price on that one
Bookmarks