VVDI 2 new tool arrived

**EMCE159** · 11th April, 2018, 09:36 PM

Originally Posted by lidons

V5,3 ???

I think service pack is the problem. I have sp3, all works. Can make a screenshot if you don't believe.

**labusas** · 11th April, 2018, 11:44 PM

Originally Posted by labusas

Hi, I'd like to share my experience with Volvo V70 2004 ID48 transponder cloning. It failed, probably because the instructions are not clear on the SNIFFING timing. I managed to get past step 1 out of 8 by holding sniffer sideways, but no more. Some other tools tell you to wait 5 min with the key out after first strep..
What is the procedure with VVDI2 please?
Thanks in advance

could some one please clarify ID48 cloning, especially sniffing timing please?

**BRMTDI** · 12th April, 2018, 01:07 PM

By BDM you mean VVDI PROG, that's all I have I believe...think that's the same...sort of...

Originally Posted by obeids

Hi there

Usually the CAS flash file should match this number 61.35-6943835-01
I got one that could possibly work as this is the closest I had.... 61.35-6943834-01. Might be the same flash with a slight variation or mine might just be a few months older. Worth giving it a try. Write by BDM.

**p1et** · 12th April, 2018, 02:05 PM

Keyless 4G0959754K 868MHz for Audi A6 C7 can be replaced by A4 fob 8T0 / 8K0 keyless same freq?

**drugowaz** · 12th April, 2018, 02:22 PM

No..........

**obeids** · 15th April, 2018, 09:46 AM

Originally Posted by BRMTDI

By BDM you mean VVDI PROG, that's all I have I believe...think that's the same...sort of...

Yes use the VVDI prog. Remember to select whther it's eeprom or Flash....

**offsystem** · 15th April, 2018, 10:17 AM

A3 2011 get message cant read immodata

**rola1971** · 16th April, 2018, 07:24 AM

Originally Posted by offsystem

A3 2011 get message cant read immodata

what story?
lost key? spare key?

**ghostrider72** · 16th April, 2018, 08:18 AM

Last time I’ve tried A3 2011 it works fine.

**u.s** · 16th April, 2018, 08:34 AM

Has anyone actually managed to get the J2534 pass thru function working?

**obeids** · 16th April, 2018, 03:18 PM

Originally Posted by u.s

Has anyone actually managed to get the J2534 pass thru function working?

Good question with no answers unfortunately....

**obeids** · 16th April, 2018, 03:19 PM

Originally Posted by offsystem

A3 2011 get message cant read immodata

Is it VDO cluster with Micronas? Maybe VVDI2 has auto detected wrong cluster. Select type manually and try.
If all keys lost then might need service mode...

**offsystem** · 16th April, 2018, 05:00 PM

It was lost key, ee read was ok but could not read immodata.

Ee was prepared with deleted immo.

**rola1971** · 16th April, 2018, 05:11 PM

Originally Posted by offsystem

It was lost key, ee read was ok but could not read immodata.

Ee was prepared with deleted immo.

put in table read eeprom reag micronas and all programmers doit for you keys
or carprog

**drugowaz** · 16th April, 2018, 06:17 PM

Originally Posted by offsystem

It was lost key, ee read was ok but could not read immodata. ...........

How you read by obd without working key? Without service mode?...........

Ee was prepared with deleted immo.

A3 need can getaway on bench. It will not power up without it.