Honda bike eeprom location

**lioncam** · 24th June, 2020, 12:09 PM

Hi mate,
Please need help to locate eeprom in this ecu, 38770-MKL-D21.
Thks.

Envoyé de mon BV9500Pro en utilisant Tapatalk

**yvanlover** · 24th June, 2020, 11:55 PM

Hi ,
I think the location is the same of others Honda intégra NC750
I'm new on the forum and I can not put a picture from my computer

**yvanlover** · 25th June, 2020, 12:29 AM

You should find here

**opencar** · 13th April, 2021, 09:25 PM

Hello. I also have such a block without keys. Can you tell me where is the eeprom?

**opencar** · 19th April, 2021, 10:25 AM

I will answer myself.
Found eeprom 93C86 in block 38770-MKL-R02
Made the key, it started up.

**MeMBraNe** · 15th June, 2021, 08:23 AM

Originally Posted by opencar

I will answer myself.
Found eeprom 93C86 in block 38770-MKL-R02
Made the key, it started up.

Hi Mate,

Could you possibly give a guide on how this was achieved? i am in the same boat with my Honda NC750X
What was used to read the chip, was was changed, how the new id46 was added - once modified was the key added via the the cable from the battery method?

**Geekey** · 19th June, 2021, 09:41 AM

Locate eeprom, use upa-usb or other programmer to read the dump. Save it.
Can use tango or effi to make key file.
Keys not by battery method.

**MeMBraNe** · 21st June, 2021, 11:05 AM

Appreciate the reply. I have different ecu, please see below. Do not see it on EFFI.
I have Keydiy kd-x2 and FVDI 2018 - possible with those tools or would i have to buy tango.
Possible advise on cheapest tools as it will be a one time use.
IMG-20210619-WA0037.jpg

**drugowaz** · 21st June, 2021, 06:01 PM

Cheapest is give job to someone else and from client charge more

**MeMBraNe** · 22nd June, 2021, 09:32 AM

Originally Posted by drugowaz

Cheapest is give job to someone else and from client charge more

Unfortunately that is not an option where i stay and it is quite expensive to have it sent away.
Hoping some one here will assist or point me in the right direction. I have time to wait for that

**Geekey** · 22nd June, 2021, 12:51 PM

Mate, you will need a programmer like upa-usb, orange5 etc... to read the eeprom and work the dump. You will need 2 keys with blank psw Pcf7936 chips ready as well.

**MeMBraNe** · 24th June, 2021, 11:52 AM

Originally Posted by Geekey

Mate, you will need a programmer like upa-usb, orange5 etc... to read the eeprom and work the dump. You will need 2 keys with blank psw Pcf7936 chips ready as well.

Thanks bud, i will purchase upa-usb as it is pretty cheap, or would you recommend Orange5 instead.
I already have 2 blank keys with id46(Pcf7936) chips.
Where would i modify the dump or what would be my next step once i have accomplished this.

**tintin2005** · 20th December, 2021, 05:46 PM

Hello.

i have a keyhin ECU 38770-kzz-933 from a honda crf250. Does it have immobilizer? It is possible do IMMO OFF?

Attached is file read from ECU.

thanks

**f2f2** · 21st December, 2021, 08:44 PM

Originally Posted by tintin2005

Hello.

i have a keyhin ECU 38770-kzz-933 from a honda crf250. Does it have immobilizer? It is possible do IMMO OFF?

Attached is file read from ECU.

thanks

Key learning easy work
Immo off big work

No blank 7836 chip key?