VVDI 2 new tool arrived

**CaioW** · 20th February, 2018, 05:40 PM

Originally Posted by hipolitogt

Today done CAS4+ 1N35H key thanks to vvdiprog+vvdi2. Good job!!! Now it's time to developers to make cas4 and fem/bdc by OBD...

Enviado desde mi SM-G955F mediante Tapatalk

Nice Job !

But dont lenght the CLK cable that much

**fytfh** · 20th February, 2018, 06:42 PM

Originally Posted by drugowaz

Have you locked manual or youtoube.its bassicaly straight forward. Instal donor cluster after reset load getaway dump. Done.
Look avdi videos

Thanks for the info but i dont find where is located getaway and what type of memory use getaway unitsl

**H.Wessel** · 21st February, 2018, 12:05 AM

Originally Posted by hipolitogt

Exeo? Working like a charm... (Doing keys) same as A4 B7 rb8

Enviado desde mi SM-G955F mediante Tapatalk

Are you sure? I tested a tacho and give me security acess failed. Tomorrow I will try again and report. I access this tacho with other tool without problem

What menu must I use? Under K-line list or Audi RB8 under Audi main list?

**hipolitogt** · 21st February, 2018, 02:32 AM

Originally Posted by H.Wessel

Are you sure? I tested a tacho and give me security acess failed. Tomorrow I will try again and report. I access this tacho with other tool without problem

What menu must I use? Under K-line list or Audi RB8 under Audi main list?

Audi Rb8...

Enviado desde mi SM-G955F mediante Tapatalk

**Maartinj** · 21st February, 2018, 04:04 AM

Originally Posted by hipolitogt

Audi Rb8...

Enviado desde mi SM-G955F mediante Tapatalk

VVDI beta version now support edit IMMO data in RB8 cluster , you can change CS, PIN, Power class
soon that version will be available

**drugowaz** · 21st February, 2018, 05:24 AM

You mean will be possible fully edit and write immo data on rb4 rb8 ?
As now its support only vin write. Tested both clusters.

**hipolitogt** · 21st February, 2018, 07:39 AM

Originally Posted by H.Wessel

Are you sure? I tested a tacho and give me security acess failed. Tomorrow I will try again and report. I access this tacho with other tool without problem

What menu must I use? Under K-line list or Audi RB8 under Audi main list?

https://m.facebook.com/story.php?sto...16885841790061

This is my FB page, you can see, done in instrument cluster option...

Enviado desde mi SM-G955F mediante Tapatalk

**auto techniek** · 21st February, 2018, 08:47 AM

Originally Posted by Maartinj

JIC is not support at 100%

Can the job be done on bench? Which tool to use?

**CarCity** · 21st February, 2018, 12:40 PM

Hi dear VVDI2 masters
I learn glass 48 for keyless dash on the bench
You think on the car start ok or not ?

photo_2018-02-21_14-57-03.jpg

photo_2018-02-21_14-57-15.jpg

photo_2018-02-21_14-57-29.jpg

Thank for your advance
( Solved Car Start fin Thank For All Friends )

**fytfh** · 21st February, 2018, 03:06 PM

drugowaz maybe you know how to be correct step for CP adaptation on cluster Q5 i have donor cluster but i dont have getaway from donor cars i have only getaway from my cars

**yugo45** · 21st February, 2018, 05:30 PM

You do not need CGW form donor, just form car.
Go to CP adaptation menu , choose Gen2, and scan.
When finish scan , Click on 17-instrumnets ( it will be high light ) click NEXT and follow instruction. When is all done, turn ignition off form 30 sec and turn back On, and SAFE should be gone.

Originally Posted by fytfh

drugowaz maybe you know how to be correct step for CP adaptation on cluster Q5 i have donor cluster but i dont have getaway from donor cars i have only getaway from my cars

**PierreTheron** · 21st February, 2018, 07:12 PM

Ok
How to add new transponder pcf7936 To Suzuki SX4 Engine ecu DENSO 33910-75KF with 93c56 .

VVDi 2 see the dump with 2 keys used but fails to add the new transponder to dump .

Please help ...

Regards

Ps dump from ecu attached ...

Seems there is fault on this so am busy with support to try and resolve it ...

**drugowaz** · 21st February, 2018, 08:03 PM

Originally Posted by fytfh

drugowaz maybe you know how to be correct step for CP adaptation on cluster Q5 i have donor cluster but i dont have getaway from donor cars i have only getaway from my cars

Not all modules go with ori car car cgw dump. Fir some modules you need donor module donor cgw dump.

carefully read manual.
Look youtube videos. There are some where you need ori cgw dump and some need donor car cgw dump. I dont remember axacly radio or aplifier module or a4 b8 needed donor cgw dump .
there are also other ways do wothout cgw dump. You need put donor module and do update on it . That module is adapted all work. But if you scan car cp error will present. But all work

**fytfh** · 21st February, 2018, 08:30 PM

I try with fvdi and with vvdi but not have luck fvdi try to unlock unlocked after 15 mim and after that say to reset procedure need of 1 to 12 min after 15 min have error failed to reset this module try with cgw dump vvdi try to unlock after 30 min ulocked the same of fvdi in 19% have messages need of 1min to 1 hour and after 40 min give me error

**ibratex** · 21st February, 2018, 10:44 PM

Originally Posted by CarCity

Hi dear VVDI2 masters
I learn glass 48 for keyless dash on the bench
You think on the car start ok or not ?

photo_2018-02-21_14-57-03.jpg

photo_2018-02-21_14-57-15.jpg

photo_2018-02-21_14-57-29.jpg

Thank for your advance
( Solved Car Start fin Thank For All Friends )

Hello carcity Sorry for getting back to you in this post but i am trying to send pm and you inbox is full

Sent from my SM-G935F using Tapatalk