VVDI 2 new tool arrived

[doctore]

My hair fell out
And my 10 minute job is tourned out to a middle age spanish autodafé[/QUOTE]

read cas with programmer eprom flash and pictures from cas unit

[sniegavirs]

small story
E91 2005 CAS3 (0L01Y) add simple key, not keyless system

everything as usual
connect
read key info
remove key..and what a surprise security bypass failed or similar
ESL syncro gone, DME syncro gone, EWS tampered in the DME, MCU failed or similar in the CAS.

My hair fell out
And my 10 minute job is tourned out to a middle age spanish autodafé

Making backup on table before is huge job i understand... If you dont have any other e90 cas backup to use for this error repair then i don't understand why are you even doing a job like this!?

[doctore]

we all bay tools for quick job on obd

Sh-t always happens, what to do when we do such a job

[jodge]

easy...
it's working i made it. It's just a story.
Sorry for the misunderstanding

[drugowaz]

This is a bug after new update.
Its not only you had this situation. Exacly 100% same error and same way bricked the car.

If you have log file of that programming. Upload it. They must fix it.

[profi]

easy...
it's working i made it. It's just a story.
Sorry for the misunderstanding

please share your experience, how to solve the problem?

thnks

[Maartinj]

small story
E91 2005 CAS3 (0L01Y) add simple key, not keyless system

everything as usual
connect
read key info
remove key..and what a surprise security bypass failed or similar
ESL syncro gone, DME syncro gone, EWS tampered in the DME, MCU failed or similar in the CAS.

My hair fell out
And my 10 minute job is tourned out to a middle age spanish autodafé

try to synchronize CAS and ELV , also CAS and ELV, car will ok
usually this problem happend when car is low battery..

[drugowaz]

Martin this not work on this bug. It sais sync ok but car not start even when sync minimum 10 times. It thows errors in cas that cas failure mcu etc. Earlier version sync elv was enought ,this time no. It not help. Vvdi not sync cas ecu never. Need use other tools.

[castin]

Simply tool for syn elv, dme?

[Tefocm]

Hi guys, im having a problem, someone bricked an MED17.5 ECU from a VW Golf Mk6 (5K chassis) GTi using Kess. Now the ECU came into my workshop but I cannot read it with VVDI...
ERRORS:

Device Error, please check whether the chip connection has a short circuit, if connection is right connect a 12V adapter and try again.
Device error.

All I want to do is write new flash on the ECU.

[Bmkeys]

small story
E91 2005 CAS3 (0L01Y) add simple key, not keyless system

everything as usual
connect
read key info
remove key..and what a surprise security bypass failed or similar
ESL syncro gone, DME syncro gone, EWS tampered in the DME, MCU failed or similar in the CAS.

My hair fell out
And my 10 minute job is tourned out to a middle age spanish autodafé

This happens alot for me with the early cas3 cars.
I just drop the trim panel and plug straight into the CAS using the adapter without removing the cas from the car.

The sync cas-dme never works for me using vvdi2. I use fvdi and it usually syncs within 3 attempts.

Sent from my SM-G950F using Tapatalk

[jodge]

for me the solution:
CAS-EVL syncro (3-7 attempt)
After the EVL was released
i just checked the DTCs
and CAS-DME syncro (first attempt)
all done with vvdi2
the old key was working and after that.... well cas3 is out and read it with prommer
i don't want to do it thru obd again

[djollie]

Hi
I'm trying to adapt a used kessy to a Tourareg.
VVDI asks me for power class, how to i get this?
Thanks
DJ

[Maartinj]

Hi
I'm trying to adapt a used kessy to a Tourareg.
VVDI asks me for power class, how to i get this?
Thanks
DJ

from ECU via Adaptation or from dump if you know where to look for that

[djollie]

from ECU via Adaptation or from dump if you know where to look for that

please find original ecu and kessy dumps...they appear to have different pin and cs....kessy is crypto?????
i guess i should use vvdiprog to read kessy.