PierreTheron (26th May, 2018)
SaMIc can you give correct pin from this magnetti marelli ecu..
VVDI 2
gives wrong pin on
it
First ecu you can see part number
Second ecu is same number and extra number 7GV CLPA
So in your 95320 it not specify which ecu or which year model it is for specifically
This ecu you find in 2011 upward on POLO VIVO .
For second ecu the correct pin calculated is 7557
Regards
Last edited by PierreTheron; 26th May, 2018 at 07:06 PM.
2013 Passat B7 CCM pin and CS decrypting ok even right after dealer made sw update (eeprom job)
but the VAG remote learning part is almost never working for me. 10/2
Sir, are you classified as human? Negative, I am a meat popsicle
HeXeN (31st May, 2018)
jodge (27th May, 2018)
hello ,
i have vvdi2 its serial VV20721990 , i need to get english region remote database.
thanks!
Hi Samic et all, I tried adding spare key for a BMW Z4 E89 2010. Needed to downgrade flash but now car not starting. Remote working on both new and old key but no ignition. Need to flash on the bench and I have no backup. Can someone send me flash for CAS ID 9389115
Log file attached.
Thanks
Last edited by Autowave; 29th May, 2018 at 04:34 PM.
"i found one bugs in vvdi2,if you try read new china PSA remote key vvdi2 kill this key and send in lock mode,and not possible programming to car."- Brat
????
Last edited by szengen; 30th May, 2018 at 09:27 PM.
fang, Narwalus microcephalus,Spectrum Zx, Atari amiga, Commodore +4
Just to clarify, the VVDISHOP took care of me. It was mistake, did not know the difference between 4th and 5th cable. And other software issue were also taken care of too.
i found one bugs in vvdi2,if you try read new china PSA remote key vvdi2 kill this key and send in lock mode,and not possible programming to car.
Can VVDI program CAS 2 key via OBD2?
Bookmarks