ramiz auto lock (17th October, 2018)
bingo.
You have few options
-Swap cluster to VDO, adapt to ECU and make new keys
- with COPY 48 OBD activation you can do all key lost via VVDi2 with Visteon cluster
no problem at all, perhaps you not have Admin Rights and windows not accept drivers
also if you use Defender add VVDI to not be scan
comizelu (17th October, 2018), ramiz auto lock (17th October, 2018)
Thanks for the replay
After upgrade to win 10 vvdi prog and mb works fine i only have problem with vvdi2
Even vvdi2 works but it comes up with a error then connects and works
Please see the picture its not from my laptop but i get the same error
I found a solution on google to fix this
I downloaded the vvdi2 database file v1.00 and run the program it worked fine for 1 hour then same again.
Soes anyone have a solution for this.
Thanks.
Sent from my SM-G925F using Tapatalk
Hi all
After updating to win10 everything is going wrong
Need a little help here
Now when i programm (vvdi mb and vvdi2) this massage comes up
Attention this version needs higher firmware support please update your vvdi2.
Can someone help me please
Thanks.
Sent from my SM-G925F using Tapatalk
Here is the pic for the real error
Sent from my SM-G925F using Tapatalk
Just update the firmware, then.
try again ,
Had a 2015 Audi RS4 today for a spare key. Read BCM2 by obd and showed success for bypass security level 1 and 2 but then gave an error message saying about the size of the file. No problem can’t do it told the customer it might not be possible before hand.
After trying to read the BCM I got traction control and steering angle sensor faults. Had similar before and a quick drive and turning steering wheel full lock in both directions has had everything back to normal. But not this time still got steering fault and traction control faults. Checking the faults shows the steering isn’t calibrated. Found the function in AVDI to setup the steering but just gives conditions not correct error. In the live data it shows the steering angle and shows it accurately.
Anyone had a similar problem?
p1et (19th October, 2018)
I wouldnt trust AVDI to do something like steering initialisation correctly. I'd use VCDS, becuse its more a normal function, and AVDI dont do the normal functions well.
Not had anything similar. Done quite a few A4/A5. Just unlucky ? Hope you get it sorted.
Cromwe11 (20th October, 2018)
Had a 2014 rs4 done steering angle sensor with vcds . And still had fault. Drove it for about 10 miles turning steering full lock were posible and in carparks etc. And still had fault, decided to
give up and drive back to workshop, normal driving on the way back and the light went off and fault was gone. Strange one !
Cromwe11 (20th October, 2018)
Bookmarks