Here..check...
http://wiki.ross-tech.com/wiki/index...res#Volkswagen
Hello,
I heve PASSAT B7 USA ( NMS) and I have to change the rear lights of the US to Europe.
I changed buye 18 of A0 on 30. Rear lights work fine but I have a fault LED on the board.
In BCM fault codes: light brake left and light brake left.
If anyone knows the correct encoding for europe??
Here..check...
http://wiki.ross-tech.com/wiki/index...res#Volkswagen
There is no information.
I have same problem, someone knows how correct encoding for europe?
Last edited by subas; 7th December, 2015 at 09:18 PM.
Hi,what lights do you have in front?Xenon?Hallogen?Post full BCM coding with vcds readout.
Last edited by dunnnia; 8th December, 2015 at 08:33 PM.
front light is hallogen.
Last edited by subas; 9th December, 2015 at 09:28 AM.
There could be difference in wiring, I will try to find diagram in ELSA
hi,try put in 18byte :64
or try :76
Last edited by dunnnia; 9th December, 2015 at 12:34 PM.
How did you do this coding ?
As I understand, to do this kind operations on new B7 you need special access code or do it online.
Please, help me to understand this moment.
UPA1.3+R270+X-ProgBox5.48+DigiProg4.85+KESSv2+Galletto3v53+Galet to1260+VAS5054+VagTacho5.0+VagCAN5.5+VagEcuTool+Op COM+KPW2000+MPPS13.02+CMD1251+RenoClip+M-VCI+CN900/4D/46+(X-100+) and o on...
Hello, can you give me the codes please for converting the VW Passat B7 USA light to european. Thank you in advance!
I think we will be seeing lots of these with same problems due to VW buy back scheme in US. Lots of used VW cars coming to Europe and Asia.
Change byte 18 to "30" and connect additional cables to BCM http://docs.google.com/spreadsheets/...Z7Y/edit#gid=0
Attachment 436130
The connectors as pictured left to right are T52c, T52b, and T52a.
Last edited by gsmik; 16th March, 2017 at 09:21 PM.
Thank you very much ''gsmik'' for the info. I want to ask you, did you solved the problem with converting, because I made some changes but the DRL is not working. After you made the changes everything works fine? Thanks in advance for your reply!
If you change byte 18 by 30 rear lights and headlights work ok but DRL not work
Hello guys, so in VCDS, byte 18 should be changed to "30", after that we need to swap some wires in BCM for rear turn signals, and also install additional wire from BCM to trunk for rear fog light. Am I right?
Also, byte "30" change BCM pinout to which car? Passat CC?
Bookmarks