soxten (25th February, 2016)
soxten (25th February, 2016)
I did today mount a new tricore tc1796 mcu on a pcr2.1 and write flash in to the new mcu.
(I did unlock eeprom to read oem mcu)
I mount ecu in car and get immo fault...
Any as having info how to get round this?
ImageUploadedByTapatalk1456583890.110603.jpg
ImageUploadedByTapatalk1456583927.958115.jpg
ImageUploadedByTapatalk1456583960.060833.jpg
ImageUploadedByTapatalk1456583992.622533.jpg
ImageUploadedByTapatalk1456584032.460878.jpg
bad idea
Yes i put a brand new tricore and write flash in to it.
In new all info is ok, and otp is not activ in the new tricore.
When writing pflash back to brand new tricore the immo info get bad...
If magicmotorsport x17 tool read oem tricore bad(?) and the fault copy to new tricore(?)
Can some one help me to tell exactly where immo is stored in pflash?
Here is immo info read from Smoke (ecu on bench)
As you see immo info is bad. (Immo ID)
ImageUploadedByTapatalk1456655065.733160.jpg
And here is same info from a other pcr2.1 ecu I have in stock.
ImageUploadedByTapatalk1456655148.386027.jpg
Read it from dash and copy it to ecu.
That should work i quess.
Wbr Adam.
Btw i remember in manual of smok it says you can wright 00000000000 and it wil be good also.
What is car you have ?
how you write flash in new tricore ?
Immo data stored in eeprom and crypt !!!
This is a Audi A3 2012 1.6TDi
I dont understand HOW eeprom and flash data get wrong...
But I think magicmotorsport x17 do someting wrong when reading flash. Or adjust something wrong in eeprom...
See pictures on history data... That is totaly wrong...
Is history data in eeprom or flash?
send all dump you have i try help you
Here is dump.
Eeprom original (read by Willem programmer by desoler)
Eeprom unlcoked (unlocked by PCR2.1 unlocker program)
Irom/Flash original read by MAgicmotorsport X17 Tool
write original eeprom without unlock
pb is otp area it must be locked on new tricore
Ok, so it must be locked...
How to lock this?
Bookmarks