SuperSim Japhar DM800HD : OpenPLi 4.0 Japhar NC3 Sim 700 IPTV FREE Chanels, SEPT 2015 - Page 2
Register
Page 2 of 2 FirstFirst 12
Results 16 to 18 of 18
  1. #16
    DK Veteran
    toysoft's Avatar
    Join Date
    Nov 2008
    Posts
    752
    Thanks Thanks Given 
    26
    Thanks Thanks Received 
    91
    Thanked in
    77 Posts

    Default

    VU+/DM Japhar OpenPLi 4.0 IPTV image from MastaG, 1300 Free IPTV Channels



    Here s a new batch of images based on OpenPLi 4 with many contributions from various openpli.org forum members and some bits taken from oe-alliance.

    So this is basically a tribute to them

    IMG01

    It took me a while since I was very short on time and I had to re-install my build-rig, move to a new feed-server etc...

    SO DUE TO A NEW FEED-SERVER ONLINE UPDATE FROM PREVIOUS IMAGES IS NOT POSSIBLE!
    DON T TRY TO CHANGE THE URL IN THESE OLD IMAGES SINCE THERE S BEEN TOO MANY CHANGES WHICH WILL BREAK THINGS!
    PLEASE FLASH A CLEAN IMAGE INSTEAD!

    So here s whats up:
    - Brand new bootlogo thanks to .:MarcinO:.
    - OpenPLi enigma2 rev: 4bf2f1e45593065f9e2b4563f30463487b727c94
    - OpenPLi oe-core rev: d76cfe6a39c6613ac77578840b214f0f1e748a39
    - Taapat s Fulan enigma2 rev: 2a984c500f5b2ea657f68742b7dc4e47f5586483
    - New receivers supported:
    * osmini
    * osminiplus
    * spycat
    * spycatmini
    * et7000mini
    * xpeed lx
    * xpeed lx pro

    - New feed server located in Europe thanks to the Japhar team!
    - New Japhar IPTV list
    - No more use of UPX compression on ARM platform (should fix the Vu+ Solo 4K build)
    - Latest gstreamer 1.9 revision from master branch
    - FFmpeg 3.0.2 with extra options enabled (based on oe-e recipe)
    - Kodi 16.1 for Vu+ Solo 2, Solo Se, Duo 2, and Solo 4K (thanks to mx3L for his bsp + recipes)
    - More wifi drivers (mt7601, rt7777 etc..) taken from oe-alliance
    - Slightly newer v4l modules for kernel 2.6.18 (dm800)
    - New version of mx3L s serviceapp now supports EPG and embedded subtitles
    - New version of exteplayer3
    - Flash extender PPanel for dm800, dm800se and dm500hd (* Please read below)
    - Many other changes I forgot to mention...

    Known issues:
    - On spark7162 (and 7111 probably as well) fragmented streams such as hls (m3u8) will skip and freeze a lot.
    This happened sometime after the official Gstreamer 1.8.0 release and I didn t found the cause yet.
    It is not related to the dvbmediasink since it doesn t happen on mips receivers and the code in the dvbmediasink didn t change.
    Configure your streams to play with exteplayer3 instead, read below.

    - Some Dreambox remotes may behave very sensitive.
    This causes button presses to register multiple times instead of just once.
    As a workaround you can adjust the key interval:
    Go to: Menu - System - Input devices - dreambox remote control (native).
    Set "Change repeat and delay settings" to yes
    Set "Interval between keys when repeating:" to 200ms or 300ms.
    Press green button (OK)
    Now set the same delay for: "dreambox advanced remote control (native)" as well.

    - DM800 first boot will take a while, please be patient. The next boot will be faster.


    Flash extender for DM800, DM800Se and DM500HD:
    Since these receiver only feature 64MB of internal flash space, I ve been unable to ship all packages.
    ffmpeg, exteplayer3, gst1.0-libav, mediaplayer2, iptv player, subssupport etc.. are missing due to insufficient space.
    That s why I ve created a simple PPanel script for moving the entire internal flash to an external storage device such as internal hdd or usb disk.
    The PPanel will also install all the missing packages for you.
    So you can have all the bells and whistles like the other receivers

    IMG02

    However please note that:
    - It will format your storage device thus deleting everything.
    - It s not compatible with other flash-extenders such as barry alen, multiboot etc...
    - You ll need a working internet connection when running the PPanel or else it cannot install the missing packages.
    - You need to patient! As the script runs you ll only see a black screen which an take up to 15 minutes depending on the size/speed of your storage device and your internet connection.

    You can find it under Blue Panel -> PPanels

    ServiceApp and exteplayer3:
    Thanks for the hard work from mx3L and samsamsam you can now play your IPTV streams with exteplayer3 or gstplayer instead of the default dvbmediasink.
    Especially using exteplayer3 will give much better performance on playing HLS streams compared to gstreamer + dvbmediasink.
    For example, playing DJING underground 720p never worked very well on my DM800HD and now it does

    In a nutshell here s how it works.
    In your /etc/enigma2/ directory you have your channel bouquets with the .tv and .radio extensions.
    Inside these files there s this for example:

    #SERVICE 4097:0:0:0:0:0:0:0:0:0:http%3a//cdn.djing.com/tv/u-05.m3u8JING Underground (CDN)
    #DESCRIPTION DJING Underground (CDN)

    By default this will play with the gstreamer dvbmediasink (which is currently broken for sh4).
    If you like to play your stream with exteplayer3 instead you should change the 4097 to 5002, like this:

    #SERVICE 5002:0:0:0:0:0:0:0:0:0:http%3a//cdn.djing.com/tv/u-05.m3u8JING Underground (CDN)
    #DESCRIPTION DJING Underground (CDN)

    You can also change it to play with gstplayer using 5001:

    #SERVICE 5001:0:0:0:0:0:0:0:0:0:http%3a//cdn.djing.com/tv/u-05.m3u8JING Underground (CDN)
    #DESCRIPTION DJING Underground (CDN)

    So it s like this:
    4097 = default player, which is the dvbmediasink if serviceapp is not enabled
    5001 = gstplayer
    5002 = exteplayer3

    Now let s say you d like to convert your entire bouquet to play with exteplayer3, simply login to your receiver with telnet/ssh (use PuTTY for Windows).
    And issue to the following commands:
    First stop enigma2:

    init 4

    Then change your bouquet to make all streams play with exteplayer3, lets say userbouquet.favourites.tv:

    cd /etc/enigma2
    sed -i s/^#SERVICE 4097/#SERVICE 5002/g userbouquet.favourites.tv

    Then restart enigma2:
    init 3

    That s it !

    You can also make exteplayer3 the default backend for playing back everything.
    Go to Menu -> Plugins -> ServiceApp and set exteplayer3 as default.

    Keep in mind that with exteplayer3 or gstplayer as default backend you will not have support for external subtitles yet (.srt for example).

    That s why I ve added MediaPlayer2 and SubsSupport from mx3L.

    Please thank mx3L for the hard work he put into this

    - Japhar

    DM800HD+ : https://mega.nz/#!nVhQnZYZ!H56CtR356...JemhCY96V53JME

  2. #17
    Newbie
    Join Date
    Jun 2009
    Posts
    3
    Thanks Thanks Given 
    3
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    Were can you buy the japhar sim from ?.

  3. #18
    DK Veteran psats's Avatar
    Join Date
    Sep 2008
    Posts
    823
    Thanks Thanks Given 
    5
    Thanks Thanks Received 
    39
    Thanked in
    34 Posts

    Default

    Quote Originally Posted by satfred View Post
    Were can you buy the japhar sim from ?.
    g o o g l e
    e b a y

  4. The Following User Says Thank You to psats For This Useful Post:

    satfred (4th December, 2016)

 

 
Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.