Hi julio501
Your in the Wrong section, this section is for Dreambox problems
Regards
Wizard
Hi julio501
Your in the Wrong section, this section is for Dreambox problems
Regards
Wizard
hi all ;
plz help me ...
actually ... when i mack it my cvs and before last step
#10 Execute command: make checkout
i found this lines
then i Execute command:make dreamboximage_rootCode:find: `/home/raed/rr/root/cdkflash/root/lib/autofs/': No such file or directory I: Using ld.so.1 as dynamic linker. I: library reduction pass 1 713 symbols, 699 unresolved No library provides non-weak _ZN8eZapMain8instanceE No library provides non-weak _ZN8eZapMain16startNGrabRecordEv No library provides non-weak _ZN8eZapMain15stopNGrabRecordEv I: library reduction pass 2 907 symbols, 68 unresolved No library provides non-weak _ZN8eZapMain8instanceE No library provides non-weak _ZN8eZapMain16startNGrabRecordEv No library provides non-weak _ZN8eZapMain15stopNGrabRecordEv I: library reduction pass 3 912 symbols, 5 unresolved No library provides non-weak _ZN8eZapMain8instanceE No library provides non-weak _ZN8eZapMain16startNGrabRecordEv No library provides non-weak _ZN8eZapMain15stopNGrabRecordEv I: library reduction pass 4 912 symbols, 5 unresolved cd /home/raed/rr/root/cdkflash/root/lib && ln -sf libgcc_s_nof.so.1 libgcc_s.so.1 make[1]: Leaving directory `/home/raed/rr/cdk' raed@ubuntu:~/rr/cdk$
and finally i got the image >>>and it was worked fine on my box
but when i want to put line for Restart Enigma and in the Execute command: rm .enigma i got error same as below
and i get image size only 1.8 mb .....Code:rm: cannot remove `.enigma': No such file or directory
what i do ??
please help me
.......................
and there is some things you most to know >>> i was formated me pc but before it >>> i copies the files packages from cdk/Archive in other drive .
then when i want to build new cvs image i was macked this steps ...
1 mkdir xyz
2 cd xyz
3 export CVS_RSH=ssh
4 cvs -d anoncvs@cvs.tuxbox.org:/cvs/tuxbox -z3 co -P -rdreambox .
5 cd cdk
6 chmod 755 prepare
7 i correct prepare file
8 ./prepare dmxyz
9 and in this step make checkout ...i was copies the files packages and posted to path cdk/Archive
10 make checkout
11 make dreamboximage_root
Is this maked error for compile ??
best regards
where are u me friend (Devilfish) ?
i try to build new cvs again ....
but in this setup >>> make checkout>>> i get this error
Code:for security reasons all user ssh-keys older than 04.2008 got deleted cvs: WARNING: Read-only repository access mode selected via `cvs -R'. Using this option to access a repository which some users write to may cause intermittent sandbox corruption. cvs update: Updating . cvs update: Updating libavs cvs update: Updating liblcddisplay cvs update: Updating liblircdclient cvs update: Updating libtuxbox cvs update: Updating libtuxtxt raed@ubuntu:~/RAED/cdk$
plz. help me ....
i have installed vmware on vista am using pre configured enviroment. it does not let me copy and paste for some reason.
i typed it in but make directory command says already exists. do i delete the main tuxbox-cvs in ubuntu or do like fairbird and change dir name eg mkdir xyz thanks
Last edited by delboy13; 3rd July, 2009 at 01:30 PM.
i still can not copy and paste but i have got as far as the epg fix. can someone explain how i extract the contents to your 'tuxbox-cvs' directory i don't kmow where to look in winrar
this for newbies developers & who wanna to make a maxvar images
to make a maxvar image you have to modify kernel ( exactly i mean dreambox.c file ) to
change proportions between cramfs & squashfs parts inside the image
you will find in the attachment the maxvar patch to do that for you
how to apply patch
put maxvar.diff after decopress in your cvs folder ( ex; tuxbox-cvs )
open terminal & launch the following commands:
Code:
cd tuxbox-cvs
Code:
patch -p0 < maxvar.diff
then
Code:
rm .linuxkernel
&
Code:
make .linuxkernel
now you have cdk with kernel customized for making a maxvar images
then launch the usual commands as follow:
Code:
cd cdk
rm .enigma
make .enigma
make rebuild-flash
Stop; here at this step & make the following steps:
go to this path \root\cdkflash\root in your cvs folder then;
remove any addons or games you don't need from \lib\tuxbox\plugins
& languages you don't need from \share\locale
& delete the unwanted skins from \share\tuxbox\enigma
Note: dont delete the default skin
finally launch
Code:
make flash-compress
congratulations , you have now a maxvar image
dear:
when I key in make dreamboximage_root and process until such an error happened : /bin/grep: /lib/libfreetype.la: No such file or directory
/bin/sed: can't read /lib/libfreetype.la: No such file or directory
libtool: link: `/lib/libfreetype.la' is not a valid libtool archive
how could I solve this problem ? I have searched on this site for a lot thread , but could not found any clue.
Hello all! It's my first post here. I had the same problem too! I had tried everything without success.Then i realised that library (libfreetype.la) was missing from the \lib folder to which a user doesn't have access (only root has). These 2 files are located in /xyz/root/cdkroot/lib (replace xyz with the directory where your cvs files are located). So i copied libfreetype.la, libfreetype.so.6 (i executed in terminal "sudo cp libfreetype.la /lib and "sudo cp libfreetype.so.6 /lib") to that folder and then i executed "make dreamboximage_root" again, and the problem was gone (As i noticed there were only 2 warnings that these 2 files were moved). I compiled the image but haven't tested yet. So i hope it works
I just did as you suggested, only to be sicuroi have tried everything and confirm that it works ..... now let's see if he comes to the end and then if the cvs
Thanks for now and see you soon.
your using old code.
don't even know if the tree is updated anymore.
I use this method now.
then for neutrinoCode:start terminal mkdir tuxbox-cvs cd tuxbox-cvs export CVS_RSH=ssh cvs -d anoncvs@cvs.tuxbox.org:/cvs/tuxbox -z3 co -P . cd cdk ./autogen.sh ./configure --with-boxtype=dreambox --with-boxmodel=dm500 --with-webif=expert --prefix=/home/ubuntu/tuxbox-cvs/root --with-cvsdir=/home/ubuntu/tuxbox-cvs --with-cpu=405 --with-epg=private --with-mhw-epg=yes --with-flashtool=expert --with-reiserfs=no --with-ext-flashtool=yes --enable-kernel26 --with-defaultlocale=english --enable-dreambox-serial-console --enable-freesatepg --disable-pictureviewer
or for enigmaCode:make flash-neutrino-squashfs
the ./configure line has many more options they are just what I use.Code:make flash-enigma-squashfs
hello ! the repository error has been fixed, and I tested and passed ,generated a image ,but not test at now
Hi all, I am a newbie to this forum and I have learnt alot so far. I have a dreambox dm500c which does not carry a card at the moment. My image is gemini and evocamd_2.14.
If I need to use a card do I need to reload a new image or can the card be used with any image and if so how do i go about activating my card slot to accept the card.
Many Thanks for any replies
I am at stage: make dreamboximage_root
the process was just fine but I now have this:
... ftp:/192.12.10.6/pub/openpkg/sources/DST/fribidi/fribidi-0.10.4.tar.bz2
.... failed: Connection timed out.
Bookmarks