OBDSTAR Mileage Correction Feedback

**looly** · 28th January, 2018, 03:37 PM

2015 Ford Ka does not work - no communication

**honingkoning** · 28th January, 2018, 06:31 PM

Originally Posted by looly

2015 Ford Ka does not work - no communication

Did you Try like fiat 500 also?

Wbr Adam.

**looly** · 28th January, 2018, 07:22 PM

Originally Posted by honingkoning

Did you Try like fiat 500 also?

Wbr Adam.

Yes. Using fiat 500 menu it reads mileage correctly but couldn't change. Using Ford menu and selecting (five hundred) it doesn't even communicate.

**Nicolas9** · 28th January, 2018, 09:12 PM

Originally Posted by looly

Yes. Using fiat 500 menu it reads mileage correctly but couldn't change. Using Ford menu and selecting (five hundred) it doesn't even communicate.

the ford five hundred is actually a mondeo-like ford model from 2006 :P

(i have last update, but i cannot see any ford Ka in menu... i have x300m)

**looly** · 29th January, 2018, 12:15 AM

Originally Posted by Nicolas9

the ford five hundred is actually a mondeo-like ford model from 2006 :P

(i have last update, but i cannot see any ford Ka in menu... i have x300m)

Ah right. Somebody said on here that Ka is available in latest update but i could not see it on my device, only saw the (five hundred) option so assumed that was the option for ka ��

**PremierD** · 29th January, 2018, 12:44 AM

Considering that it is based on the 500 ... I think you may be correct mate ...

**Quiet** · 30th January, 2018, 05:13 AM

hi, which menu to do ford ranger 2012? because i can't find ford ranger on the menu

thanks

**Nicolas9** · 30th January, 2018, 10:14 PM

anyone tried mazda cx3?

**Quiet** · 31st January, 2018, 03:09 PM

Originally Posted by Nicolas9

anyone tried mazda cx3?

new cx 5 and cx 3 works

**ledong** · 1st February, 2018, 05:45 AM

Any body try with Chevrolet Colorado 2016?

**eliaselias** · 1st February, 2018, 06:25 AM

kia rio 2015 i have done many before but this car fail i get a message like (could not read mileage)

**zckariya70** · 1st February, 2018, 02:35 PM

Anybody have any problem with this device like no communication or anything do as follows

1, Connecting x-100pro-- Staring up x-100pro-Pressing “option”-Pressing “Data Logging”-Pressing “on-”Pressing ESC - Back to the main menu.
2, Operate the normal procedures to mileage adjustment.
3, When it fails to adjust , power off the machine.
4. Pull out TF card where there is a LOG file.
5. Send the LOG file to Obdstar technical person can analyze the data for you.
Note: Every time you power off the machine, Data Logging is "OFF". So if you want to save the data next time, please follow the above procedures.