OBDSTAR Mileage Correction Feedback

**Berubeg** · 20th October, 2021, 12:12 PM

Ferhel19 Also hours?

**donesko** · 23rd October, 2021, 10:34 AM

are these latest updates version for x300m ?

**brend** · 23rd October, 2021, 04:16 PM

Originally Posted by donesko

are these latest updates version for x300m ?

X300M-----> to Odomaster.

**donesko** · 23rd October, 2021, 04:30 PM

is it odomaster same as OBDPROG M500

**brend** · 23rd October, 2021, 05:36 PM

Originally Posted by donesko

is it odomaster same as OBDPROG M500

You can known only test away after bay both for this .
But my thinking it's............... obdstar<----------copy/paste----------->obdprog500

**Derryfarmer** · 23rd October, 2021, 05:58 PM

Originally Posted by donesko

is it odomaster same as OBDPROG M500

Pretty much, only real difference is OBDSTAR seems to get updates before OBDPROG.

**halkabn** · 24th October, 2021, 03:15 AM

Honda, Toyota , 2008 mercedes gl550 , NO to all

**brend** · 25th October, 2021, 06:48 PM

Originally Posted by halkabn

Honda, Toyota , 2008 mercedes gl550 , NO to all

Mate , No to all what ?............

Please for report put correct car model and year and wich one exactly tool you mean.

**Derryfarmer** · 29th October, 2021, 01:53 PM

Clio 4 with M500

Mode 1:
ABS Blocked fine and km updated but trip computer broke

Mode 2:
Update dash mileage, all ok but reset from ABS mileage sync
Update ABS mileage, read the file, edit manually on hex editor and then write back with M500

Trip computer works fine using this method.

**quato79** · 8th November, 2021, 10:22 AM

Hi,is it safe to try 2014 MB W218 dash calibration with X300M ? I can read correct mileage now via OBD,but I am not sure for writitng,as I know EZS problem may occur without canfilter? Any suggestions?

**drpeter** · 8th November, 2021, 02:53 PM

Originally Posted by quato79

Hi,is it safe to try 2014 MB W218 dash calibration with X300M ? I can read correct mileage now via OBD,but I am not sure for writitng,as I know EZS problem may occur without canfilter? Any suggestions?

There will be no problem, but your ezs will be permanent programmed to 1,6milion km, there is no way back.

**ikara** · 11th November, 2021, 08:10 PM

Originally Posted by frankrayk

Here I read and write via OBD from C3 with BSI Siemens with eeprom 95160 with OBDSTAR , but I prefer to do manual editing. Panel has to unmount to read and write eeprom.
Do this procedure with a good battery, or attach a charger.

Thx. but done long time ago. BSI with Obdstar and Dash manually