SANCHELO (4th February, 2018)
Fiat doblo, punto, stilo to 2009 all ok, sametime must 2 or 3 time change km -DOBLO- but all ok
new update for peugeot/citroen cars!
Cluster Calibrate
Peugeot/Citroen vehicles new increased
1. BSI System
<1>CONTINENTAL BSI-Q0X: EEPROM backup, cluster calibrate, EEPROM recover, FLASH backup
<2>JC BSI04EV-K0X: EEPROM backup, cluster calibrate, EEPROM recover, FLASH backup
<3>JC BSI2004-H0X: EEPROM backup, cluster calibrate, EEPROM recover, FLASH backup
<4>JC BSI04EV2-KEX: EEPROM backup, cluster calibrate, EEPROM recover, FLASH backup
<5>SIEMENS BSI-S0X: EEPROM backup, cluster calibrate, EEPROM recover, FLASH backup
<6>SIEMENS BSI-E0X/BSI-F0X: EEPROM backup, cluster calibrate, EEPROM recover
<7>VALEO BSI-N0X: EEPROM backup, cluster calibrate, EEPROM recover, FLASH backup
<8>VALEO BSIEV-X0X: EEPROM backup, cluster calibrate, EEPROM recover, FLASH backup
<9>VALEO BSI2004-P0X: EEPROM backup, cluster calibrate, EEPROM recover, FLASH backup
2. Dashboard System
<1>3008: EEPROM backup, cluster calibrate, EEPROM recover
<2>5008: EEPROM backup, cluster calibrate, EEPROM recover
<3>C4: EEPROM backup, cluster calibrate, EEPROM recover
i have x300m, its not in update program yet. but i'm just giving info from website. it probably comes in short future.. (and even when it already was listed in the update program, then it doesnt mean it works yet.. but it's good to know they are working on french cars now).
bye the way, i just did porsche panamera.
it didnt work with software update!
i tried with x100 pro & x300m. v30.26 didnt work. with v30.21 it did work!
Last edited by Nicolas9; 5th February, 2018 at 04:35 PM.
DashProg (9th February, 2018), eliaselias (5th February, 2018), shirokov (6th February, 2018)
Scirocco late 2014 would not work. It read dash part number but could not go further.
if this post was usefull
please press
the thanks button
Skoda A5 2012 X300M 1 min ok
hi, anyone know what menu to do ford ranger 2012?
7/2016 VWGolf R
X100 Pro 👎
X300m 👎
Supers bb2 👎
Machine would write turn ignition on with valid key
????????
Car has pushbutton start no key for the ignition to turn
Last edited by Thos; 7th February, 2018 at 12:51 AM. Reason: More detail
Hey, having issues upgrading software on my tools...
I have x300 Orange Programmer
I have Ford/Mazda unit also...
One Key Upgrade, does not show any other products registered....
How can I get this fixed...
Also wanted to do 2011 Ford F250 Mileage Correction and Key Synch...and it deleted previous immo options.
Try this:
1. Put car on contact (press start button)
2. Remove battery from key!
3. Hold key to the steering wheel box (on the right side there is a symbol located! Hold the key on this symbol.
4. Do mileage correction.
5. Release key from steering wheel and replace battery.
Thos (9th October, 2018)
obdstar.jpg
Update will be very slow because they r upgrading their server....
Nothing will remain in this World , Everything will come to END!
THINK POSITIVE NOTHING IS IMPOSSIBLE
Please do not spam by PM asking for help. Use forum, that is why we are here.
Bookmarks