First thing which one need to be fixed:
http://www.digital-kaos.co.uk/forums...one-km-373755/
First thing which one need to be fixed:
http://www.digital-kaos.co.uk/forums...one-km-373755/
MagicMotorsport FLEX, Kess / K-Tag original, PCM Flash, MMC Flasher, BitBox, 2wd Dynomet Dyno Road, Ori WinOls.
We offer: Cars, Trucks, Agro, Construction Machines Tuning / DPF / EGR / Flaps / Throttle / Ad Blue / Lambda / DTC, IMMO off. Also EDC17 IMMO off BY EEPROM with no faults on a dash!
sprinter 2007 esl steering lock did not read true kline so far tool is a disaster
ahmedadel (31st December, 2015)
ahmedadel (31st December, 2015)
i have a fdvi ID F01114 with Mazda /Ford V4.9+Tag V6.1+H&K V2.1 but the special function for programming keys , injector and adopting new units is not working , it only saying failed
ahmedadel (31st December, 2015)
ahmedadel (31st December, 2015)
any reports on this i have mind sent back for softdog going to try full for 6 months anyone get theres back curious is working well
Hello fellow; que tal? recently acquired one full VFDI. my experience will be numbered.
mercedes w212-in odometer adjustment stays reset the Getaway. you should go to official dealer and make a scn. and not reset odometer.
- Fiat Punto 2010/2009/2008. odometer adjustment does not work either takes eprom read 1.3 mj.
- Ford focus 2007 makes no adjustment odometro-
-BMW e / 87 Series 1 does not communicate with any module.
-BMW x3 2009 does not communicate with almost any module except motor.
corsa D -opel not adjust odometer or read eprom 1.3 mj
-works well with almost all new vehicles.
I wish I have if someone could help me in ques odometer adjustment of physical keys, and to perform an upgrade key?
thanks for your help, and if I can help in something I'm here. ;-)
Deshacer cambios
Hello.
I have a FVDI with the ID : F09461 for Fiat, and another one with the ID: F07407 with all the software.
With both of them FVDI I can't read the BCM siemens and nor the BCM marelli. I can only read the BCM delphi (93C66).
- With the psa software I can't read the security code and I can't work with the BSI Exchange neither.
- With the VAG software while I'm programming the keys by wizard mode the software has locked two cluster of Seat Leon CAN bus system with micronas MCU into the cluster.
If you can help me with these problem I will be very grateful with you.
Thanks in advance.
Cars&Keys.
If it is Fly Company Ltd. FVDI full 4500USD.
Which you already pay good money for, you can update it with "Softdog" and FVDI 2015. You will get latest V6.3 software.
Need to send it back to Fly Company Ltd.
Costs: About 95 USD for Softdog, plus shipping of only the circuit board from the FVDI box to China.
Freight from China is free.
Should be free software updates forever.
And probably some support on these cases.
If copy or none updatable. There are some people on forums which offer other solutions. So you can get the latest updates.
ahmedadel (31st December, 2015)
ahmedadel (31st December, 2015)
ECU adaptation doesnt work (EDC16, did not try EDC17 but gues also fail) . Work few time when one of tech support was online. Now - doesnt
v21 - when Micronas cluster read - show " No millage in DSG module" , must use V18 to read Micronas cluster
Immo 5th - missing licence
ahmedadel (31st December, 2015), Dani375 (3rd December, 2018), Qaso0ombh96 (26th October, 2020)
Bookmarks