VVDI MB BGA TOOL

**CarCity** · 25th May, 2017, 07:22 AM

Please help me find erase pass
Thank you

Sent from my iPhone using Tapatalk

**koyot** · 25th May, 2017, 08:44 AM

find manual

**jacostanzo** · 25th May, 2017, 09:25 AM

Please need help, have 2 NEC from ESL, after clear fatal error can't write or personalize, TP cleared box is ticket, can't clear tp or renew, even by OBD. Those NEC are damage?Anyway to recover it? thanks

**klychnik** · 25th May, 2017, 10:35 AM

Good evening everyone. I have a EIS A 164 545 18 08. Tried to calculate erase pass numerous times, but in vain.
Special Key: FDA87E918251033D

Would appreciate if somebody calculated an erase pass for me.
TY in advance

**ficho** · 25th May, 2017, 12:36 PM

Originally Posted by klychnik

Good evening everyone. I have a EIS A 164 545 18 08. Tried to calculate erase pass numerous times, but in vain.
Special Key: FDA87E918251033D

Would appreciate if somebody calculated an erase pass for me.
TY in advance

HI,

Specail Key: FDA87E918251033D
Erase Pass: D9AF7EE36BABF2D2

regards ficho

**ficho** · 25th May, 2017, 12:38 PM

Originally Posted by carcity

Please help me find erase pass
Thank you

Sent from my iPhone using Tapatalk

HI,

Special Key: D0C5BE4D6FDC1D5F
Erase Pass: 6BE2E69DB55A3F1D

regards Ficho

**labusas** · 29th May, 2017, 01:43 PM

Hi, Does anyone have info about china BE key stopped working in a week or so after programming on w204? Is it a programming issue or a circuit board fault?

**autoTkey** · 29th May, 2017, 02:06 PM

Does it work when you read it on VVDI. How about if you reprogram it?

**bluesky2010** · 30th May, 2017, 11:38 AM

Originally Posted by labusas

Hi, Does anyone have info about china BE key stopped working in a week or so after programming on w204? Is it a programming issue or a circuit board fault?

I think it's not programming issue. BE key problem. I have faced same problem few times. Changed key and problem solved

Sent from my SM-G900H using Tapatalk

**autoTkey** · 30th May, 2017, 11:56 AM

I never had this problem. Only heard of other people having problem with changing gears but not with starting the car.
Labusas did you check the key if it reads OK in the VVDI tool?

**CaioW** · 30th May, 2017, 11:58 AM

It can be the hash calculation or the key.

But it is most likely bad chinese key.

**labusas** · 30th May, 2017, 12:42 PM

Originally Posted by labusas

Hi, Does anyone have info about china BE key stopped working in a week or so after programming on w204? Is it a programming issue or a circuit board fault?

It was a bad chinese key. Resoldering didn't help, no visible damage. Could be coil that failed but it's not worth any further investigation for the cost of it.