VVDI MB BGA TOOL

**Samic** · 10th October, 2016, 02:24 AM

Originally Posted by dritan

Does the new upgrade sw and fw can include nec eis 221 and 164 all key lost make key
Sent from my GT-I9301I using Tapatalk

next version will be released personalize ESL function first in 'ESL tool'(no need renew eis)
about W221, W164 all key lost also will support soon.

**Samic** · 10th October, 2016, 02:25 AM

Originally Posted by gurmk

2005 W211, Customer wanted spare key, he has 1 fully working key and another start only, central locking not working.
Could not read EIS via OBD, only via IR. Tried to get password via on line and I kept getting key not synchronised with EIS.
So decided to try and get password from NEC of second key (Success).
Made another key and when inserted into EIS, all I get is "Computing data please wait". After 10 minutes still the same.
The key count kept going up every time I inserted the EIS after reading the key but just below it was still showing Unused.
Anyone had the same experience?

select another key position and try again,let me know the result.

**autocheck** · 10th October, 2016, 07:48 AM

Are we going to have a solution soon for all key lost w209 and w211. This car is giving problem with flash file being corrupted? Mr Samic urgent help needed.

Sent from my A718 Xplora Plus using Tapatalk

**aassfour** · 10th October, 2016, 08:02 AM

Originally Posted by Samic

select another key position and try again,let me know the result.

the best solution for this , remove the EIS , read it with vvdi prog and calculate dump to get keys. that way its guarantee the keys will start the car again

**aassfour** · 10th October, 2016, 08:05 AM

Originally Posted by autocheck

Are we going to have a solution soon for all key lost w209 and w211. This car is giving problem with flash file being corrupted? Mr Samic urgent help needed.

Sent from my A718 Xplora Plus using Tapatalk

i dont think its possible at the moment donno my own opinion since the password is protected by 9s12. the best easy solution , remove EIS and calculate DUMP. its just a 10 minute job , with VVDI prog i dont think u will corrupt the flash unless u use a cheap 9s12 programmer like old Rosfar

**tech111** · 10th October, 2016, 06:56 PM

I tried today with 7g plate version 1 and wasnt able to do it. Also can I renew vgs 2 and keep scn coding and program inside so I can use it in car without going with online procedure?

**jacostanzo** · 11th October, 2016, 09:24 AM

Yesterday I made w207 all key lost with VVDI. Work perfect, great tool!!

**hbt** · 11th October, 2016, 08:10 PM

Does somebody know how to make All keys lost W906 ?

**daxxer** · 11th October, 2016, 08:17 PM

Originally Posted by hbt

Does somebody know how to make All keys lost W906 ?

remove EZS, open it, read MCU ( 0L01Y is there i think ) eeprom, save dump and calculate keys

its easy to do it

**hbt** · 11th October, 2016, 08:57 PM

Originally Posted by daxxer

remove EZS, open it, read MCU ( 0L01Y is there i think ) eeprom, save dump and calculate keys

its easy to do it

Can it calculate all type of ezs models?

At w639 how do you know where keys are located?

Regards,

**kevfield** · 11th October, 2016, 10:53 PM

Originally Posted by hbt

Can it calculate all type of ezs models?

At w639 how do you know where keys are located?

Regards,

Keys are in R2 mcu on W639

Thanks Kev

**crazylou2017** · 12th October, 2016, 10:07 AM

Originally Posted by PremierD

Why not just go to the xhorsetool site .http://www.xhorsetool.com/wholesale/5-tokens-for-vvdi-mb-bga-tool-password-calculation.html

Not sure whether or not you are tied to your supplier though

Bought one MB BGA tool software 2.0.8 from this site to make key on w204 with all key lost but failed, other models are working fine, I made a refund request on them, and the saler told me to wait for the new update ,because 2.1.0 version is able to read W204 ESL correctly......while after two weeks later they sent me the 2.1.0 software link ,then I orderd 2 tokens(W204 need to buy 2 tokens to read the ESL information), I updated my machine and tested it working fine as advertised. Very happy with this machine.

**jacostanzo** · 12th October, 2016, 10:38 AM

Anybody have tried read password by IR on w639? and 220/215?
I have tried many 210 / 208 / 202 no one have succes.
With 203 k-line succes rate is 100%

**mercis** · 12th October, 2016, 11:21 AM

639,906,210,202 dont work

**daxxer** · 12th October, 2016, 11:42 AM

Originally Posted by crazylou2017

Bought one MB BGA tool software 2.0.8 from this site to make key on w204 with all key lost but failed, other models are working fine, I made a refund request on them, and the saler told me to wait for the new update ,because 2.1.0 version is able to read W204 ESL correctly......while after two weeks later they sent me the 2.1.0 software link ,then I orderd 2 tokens(W204 need to buy 2 tokens to read the ESL information), I updated my machine and tested it working fine as advertised. Very happy with this machine.

you can update SW and FW self directly, no need any seller link or others

only connect your VVDI unit internet and press update FW and SW...