VVDI MB BGA TOOL

**rrador** · 18th December, 2015, 02:32 AM

Originally Posted by Siham

No its not about VVDI!

The legend ask for 2000$ for activation for BGA but we must have MB doctor Full and we will no need tokken !! That's a Joke !
Used their tool for 3 months and after that I sold it ,it's not a SOO GOOD tool as i thought !!

Hip Hip Oura for Xhorse prices !!

What didn't you like about thelegend tool? I was thinking about buying their tool. What are you using now?

**jacostanzo** · 18th December, 2015, 05:39 PM

Originally Posted by Siham

Yes but still some difference between them.
The legend ,Abrites both cannot get pass from EZS FBS3 without working key. Only for BGA !!!! EZS FBS3 are mounted in what model of mercedes?
If you have Abrites you need to contact SimonTouch for ELV calculation .
And the big question is how much it will cost BGA pass ?? The lower price at the moment is from Xhorse ,but this tool still need to be tested and totaly finished ,they are still adding fonctions , also wait to see about Bugs (xhorse I support your products but please just sell a tool when is totally finished and not partially ,customers are not beta testers

)
Also i still did not get a car with BGA ,yet to see it.
When I started with MB keys (v51 /v57) i put many money for a tool ,now after just 2 years i do the same job and also renew and repair blocked ELV with a tool that cost less than 1500 $ , even with all keys lost but of course need new EZS.
If in future i will add more tool for MB keys for sure I will go for xhorse but not now better to wait and see if the tool worth it .

Ciao Mate !!

AVDI can do BGA key password calculation now???

**Mario3** · 18th December, 2015, 08:11 PM

Originally Posted by jacostanzo

AVDI can do BGA key password calculation now???

No, it can not

**phara0n** · 19th December, 2015, 07:55 AM

ive experienced many tool for this MB jobs, Simon Thelegend Diagspeed NecPro57 ... the best QUALITY/PRICE is the legend, fast in everything and 100/ 100 working device with specially a very good support.
im going to get the new BGA activation for 2000$ ive already the mbdoctor full ...
for exemble unlocked esl enc with 0xAA error is about 30 min with thelegend when others took hours ...

**Mario3** · 20th December, 2015, 12:30 AM

Any news about shipping dates for preordered vvdi bga units ? Im still decideing what to buy, but since abrites sale ends in 3 days im still unsure if to wait or not..

**insomnia2009** · 20th December, 2015, 01:01 AM

i have vvdi 2 and vvdi prog and condor my advice to you if you can afford abrites go for it vvdi 2 and vvdi prog need lots of work maybe some time will be really good but now i dont think so

Sent from my GT-I9505 using Tapatalk

**Siham** · 20th December, 2015, 01:09 AM

Originally Posted by insomnia2009

i have vvdi 2 and vvdi prog and condor my advice to you if you can afford abrites go for it vvdi 2 and vvdi prog need lots of work maybe some time will be really good but now i dont think so

Sent from my GT-I9505 using Tapatalk

Are not good in what fonctions exactly ?
Vag or BMW ?
Key programming or coding or others?
I know those tool are still not complete and still have many many many bugs! But they are working on it.
Avdi price for BCM2 is 2000 EU , with that price you can get other tool to make the job. And do not spoke about others fonctions.

Thank you Mate !

**insomnia2009** · 20th December, 2015, 02:05 AM

Originally Posted by Siham

Are not good in what fonctions exactly ?
Vag or BMW ?
Key programming or coding or others?
I know those tool are still not complete and still have many many many bugs! But they are working on it.
Avdi price for BCM2 is 2000 EU , with that price you can get other tool to make the job. And do not spoke about others fonctions.

Thank you Mate !

i agree with you on prices etc i was just saying if he can afford avdi would be better option, on vag there is plenty of problems on bmw i tryed once to add a key and lost sync with elv and failed to sync that was enough for me to test had to get a friend with icom to solve it for me i support xhorse 100% but think its unfair we have to test on cars they should warn us its not tested it cause serious problems and costs

i know new updates have solved sync problems just saying that was the case a few months ago

**Siham** · 20th December, 2015, 04:05 AM

i'am 100% agree with you , we are not testers.
I'am thinking since sometime to get VVDI2 for VAG specially for 5tH immo but still not convincted in this tool and no one can give feedback about BCM2 key programming with this tool also just downloaded and reading their user manual for vag !!!! Need to read 2 times to understand what to do and the procedure to follow .
RRADOR I use noimmo now and pretty happy ,for the other reason i will not explain it in public ,sorry.

For the rest is a good tool .

**autodigitec** · 22nd December, 2015, 02:36 PM

Anyone have the tool yet?

Different sellers tell me different things.. Some say without condor you have to always pay 35usd, others say you dont need condor to have 1 calc free per day.

Can samic say what's the real deal?...

**diagprog7** · 22nd December, 2015, 03:08 PM

Originally Posted by autodigitec

Anyone have the tool yet?

Different sellers tell me different things.. Some say without condor you have to always pay 35usd, others say you dont need condor to have 1 calc free per day.

Can samic say what's the real deal?...

You have a KEY CUT MACHINE XHORSE, you are free to calculate once a day, if not, every charge $35! Strong request, can not ask, how to charge the problem, which will allow us to violate the rules of the forum.

**autodigitec** · 23rd December, 2015, 11:41 AM

Thanks, because obd2express keeps saying I get 1 free calc per day even if I dont have their key cutting machine..

Can you say exactly what comes in the package when we buy it? I was told it has this: http://i.imgur.com/OgbFbB0.png
So no other cable adapters, although previous pictures showed adapters for the newest EIS'.

**autoTkey** · 23rd December, 2015, 05:14 PM

Still too early - first deliveries will surely be in January.

**tunertool** · 23rd December, 2015, 07:32 PM

Please guys dont get your hopes up with this china tool... it all looks good on the packaging but will be unlikely to work on newer cars!

**Nassreddine84** · 23rd December, 2015, 10:28 PM

Hi dashprog dear plz can u tell me how to communicate with xhorse support team i bought vvdi programmer and i donno who shell i contact i need support regarding the wiring diagram of cas4 and porsche new bcm its a little bit complicated for me with cutting and so on any website or forum u know who is samic and gesily thank u mate