New videos : https://www.youtube.com/watch?v=-PrH...&feature=share
https://www.youtube.com/watch?v=3rZ5EUGT86k
Seam we will get a powerfull device !!
New videos : https://www.youtube.com/watch?v=-PrH...&feature=share
https://www.youtube.com/watch?v=3rZ5EUGT86k
Seam we will get a powerfull device !!
No thank , no HELP .
It seem become days after days a good tool. I'll wait a little time again before purchase it.
Why need to renew EIS ???
With other tool we do not need to that !!
Also I do not understand when we have a all keys lost situation and we make transfer of hasch data from old to new or reneewed ezs we have to renew also elv? with necpro,MI we do not need to renew elv if we make transfer data from old to new ,we only do that when we make a grey key to adapt Brand new EIS not renewed.
In the videos there s something i do not understand is at the moment when the guy put password its real pass or just choosed randomly?
If the ezs is not new but renewed and have working key (because we always need to have a working keys to make renew !!!) what would be the procedure ?
We just read old ezs hasch data and adapt them to the renewed ezs using the password exacted before from the working key that belong to this renewed ezs?
Thank you Samic
No thank , no HELP .
hi Samic
could you ask the ingenier to add one free calculation at day without having xhorse cutting machine?,
I think is reasonable and will boost product sales.
If not, it?s needed to add +35$ for each key, which will make hard to lower the MBenz distributor key price here..
Thanks in advance!
H.W
Last edited by H.Wessel; 28th December, 2015 at 09:01 AM.
AutoKluczPomoc (9th January, 2016)
For Nec key, can us use SKC for calculation or need online and pay fees for calculation?
Thank you Samic for reply.
for W204 change new ESL( programming new ESL),you should renew EIS first,this is the standard method.
later we also will support "not need to renew EIS".
about all key lost,the Key Password manually at random.
"If the ezs is not new but renewed and have working key (because we always need to have a working keys to make renew !!!) what would be the procedure ?
We just read old ezs hasch data and adapt them to the renewed ezs using the password exacted before from the working key that belong to this renewed ezs?"
sorry,could you explain to me what do you wanna do?
lion0304 (28th December, 2015)
I know, that why I am asking:
Currently in my town: 35usd+key blank (50$)+labour time is same price that on MBenz dealer.
About Condor, well, I have a cut machine already, can?t spend money on other for doing the same job....
A free 1 calculation/day for everyone will be perfect. And I think that people will buy this tool faster... I have not purchased your tool yet for that reason...
My two cents.
Best regards
H.W
Last edited by H.Wessel; 28th December, 2015 at 04:05 PM.
AutoKluczPomoc (9th January, 2016)
I too would purchase this tool if we got the free calculation daily without having to buy condor machine
With all devises in market you should renew elv when all keys lost
because you should p?t new password so elv must BE renewed also
in ezs and elv not ONly Hash password also
Hello Mate ,
What I mean is : when we read the hasch data from old EZS (w204) that have all keys lost , we type the pass randomly and after that we write those data (hasch and pass) in the Brand new EZS , right ?
So my question are :
1- What will be the procedure if instead using BRAND NEW EZS we use renewed ezs that also have a working key?
2-Can your tool renew ezs (w204) without having a working key ?
3- Are your tool able to get password from EZS FSB3 without having a working keys (EZS W166, 212, 246) ? like MI ,Diagspeed and necpro57 are able to do ?
4-Are your tool able to get password from old EIS that have motorolla like w203 w211 etc... ??
5- Can your tool repair ELV (w204) that have fatal error AA or when we need to change the internal motor (close and open elv)?
Also in your manual you say no need to desolder nec chips from keys (51 or 57 ) to get password ,what do you mean please?
And why we can't use SKC to make calculation ? i do not speak about BGA keys !!
3abas27 what you say is wrong !!! Not all tool need to renew ELV when changing EZS if all keys lost !!
Best regards Samic .
No thank , no HELP .
Bookmarks