VVDI MB BGA TOOL

[vageric]

guys, help me please, on this 2006 mbz c class w203. the key is defective, cannot read the IR or NEC. can not access the eis with IR to get the pass, obd2 reads ok. if I post the eis, can you guys get me the pass from the dump?????? thnx in advance.

here you go!
psw: B9 59 DF 82 A1 84 84 01

[tferenc]

dd1: B9 59 DF 82 A1 84 84 01

[tferenc]

vageric was faster than me...
dd1.jpg

[tferenc]

vageric was faster than me...
http://www.kephost.com/image/EZev

[dd1]

Thank you guys so much. Vageric and tferenc

[dd1]

I have another issue. How do you guys read the mbz Gl 450 it's a w164. Eis? I need to get the key pass and IR no luck and I can only read it by obd2. If it is bench, can you guys provide me with a pinout or diagram for xprog???? Thnx in advance

[djollie]

my mbtool always reverts its firmware back to 2.0.8 after any update...is there a fix for this?

[vageric]

I have another issue. How do you guys read the mbz Gl 450 it's a w164. Eis? I need to get the key pass and IR no luck and I can only read it by obd2. If it is bench, can you guys provide me with a pinout or diagram for xprog???? Thnx in advance

what is year car?
if its motorola then is possible to read
if its nec not possible to read. only obd or IR!

[vageric]

my mbtool always reverts its firmware back to 2.0.8 after any update...is there a fix for this?

contact xhorse or samic or xhorsesupport.

[Xhorsesupport]

my mbtool always reverts its firmware back to 2.0.8 after any update...is there a fix for this?

Please check your PM,I'll check for you!

[dd1]

Hi. It's a 2008. Need to make a key.

[dd1]

what is year car?
if its motorola then is possible to read
if its nec not possible to read. only obd or IR!

It's a 2008. Need to make a key. IR won't read. Only obd2. Is this enough to get a key pass?

[tferenc]

I have another issue. How do you guys read the mbz Gl 450 it's a w164. Eis? I need to get the key pass and IR no luck and I can only read it by obd2. If it is bench, can you guys provide me with a pinout or diagram for xprog???? Thnx in advance

Can you send the EIS part number?

[rola1971]

It's a 2008. Need to make a key. IR won't read. Only obd2. Is this enough to get a key pass?

spare key or lost all keys?

[dd1]

It has no keys at all, Eis is A1645451308