VVDI MB BGA TOOL

**autodigitec** · 6th December, 2015, 05:26 PM

The bga password calculation is free once a day, extra is 35 each. sounds good.

**Mario3** · 6th December, 2015, 05:56 PM

Originally Posted by autodigitec

The bga password calculation is free once a day, extra is 35 each. sounds good.

So what remains is to just wait it out till its finally availible

**hamzadaw2000** · 6th December, 2015, 07:48 PM

Mario3 so no need to order MN022 to get password via IR for w211 and w203

Sent from my iPhone using Tapatalk

**Mario3** · 6th December, 2015, 08:02 PM

i have mn022, but still waiting on this cause i need something that can read v51 and v57 pasword from key, almost ordered mn024+abprog but thought also to buy simon touch nec key lite (cheapest solution). But if this will make the v51 and v57 psw too, and plus BGA key there is no doubt what ill take.

**austingreen** · 7th December, 2015, 07:26 AM

News!!!
The dealer is accepting booking.

**jeccy** · 7th December, 2015, 07:30 AM

I have read something about it in another forum. it's more detailed in this forum ****

**Mario3** · 7th December, 2015, 01:16 PM

BGA pass is free once a day and the next one in the same day is 35usd if you own a condor keycutter, if not every one is 35usd

**oep** · 7th December, 2015, 10:06 PM

Any updates on BAG calculations :-]

**Siham** · 7th December, 2015, 11:47 PM

Hope it will be out soon , but was wondering something :

-They say renew ezs/elv the one equiped with nec mcu ?
-Can this tool read pass from ezs with ezs equiped with motorolla?
-Can it generate green key?
-Get pass from EZS FBS3 ?

Thanks.

**Samic** · 8th December, 2015, 10:58 AM

Originally Posted by Siham

Hope it will be out soon , but was wondering something :

-They say renew ezs/elv the one equiped with nec mcu ?
-Can this tool read pass from ezs with ezs equiped with motorolla?
-Can it generate green key?
-Get pass from EZS FBS3 ?

Thanks.

support renew ezs/elv the one equiped with nec mcu,
read pass from ezs with ezs equiped with motorolla-only support CAN bus protocol EIS.
about green key:need to know whether that green key is use to enable disabled key,if so,cannot support currently.can support generate key data.
get pass from EZS FBS3,of course ok.

**H.Wessel** · 9th December, 2015, 01:59 PM

Originally Posted by jeccy

I have read something about it in another forum. it's more detailed in this forum mhhatuo.

Notice that person that write that don?t test it personaly, don?t even know what models are supported by tool,
just copy&paste from this thread, post #49: http://www.digital-kaos.co.uk/forums...=1#post2648409
so just publiciting some sales...

English version of the tool was told to be in process at 4 Dic, AFAIK still not released.
The result of the test came from Jian, he did upload some videos where calculation was fast but is told that uses Rusian calculator..??

I think the tool is still on development state.

Best regards
H.W

**autodigitec** · 9th December, 2015, 03:27 PM

what about w204/w207/w212, why does it say "only by dump"?

**3abas27** · 9th December, 2015, 09:34 PM

Yes which dump ask samic for w204 212 207,?

**philipcoin** · 9th December, 2015, 11:39 PM

seems
VVDI MB TOOL start selling.

http://www.vipprogrammer.com/xhorse-...64ef56f79356e2

**autoTkey** · 10th December, 2015, 07:25 AM

Originally Posted by philipcoin

seems
VVDI MB TOOL start selling.

http://www.vipprogrammer.com/xhorse-...64ef56f79356e2

I don't think so. I found this line in the description on the page: "Need 5-10 days preparing goods." which for Chinese usually means at least a month

Well it has a specific price, though ....which is double or at least 25-30% more than it should have been.

It's strange though ...AVDI got surpassed by something that started out as an AVDI clone.