I agree with MarkPRP.
Mark, can you answer pm?
+ MarkPRP
Remove EIS 2 min
Read EIS by VVDI prog 2 min
Calc key by SKC 10 min
Write key 1 min
15 minutes left it easy!
daxxer (21st October, 2016)
ttzag (21st October, 2016)
Need another update
Remove eis for me ....1 min
Sent from my LG-D802 using Tapatalk
Actions speak louder than words
daxxer (21st October, 2016)
How is remove EIS 1/2 minutes? What's the tricks here? There are these brackets behind that are hard to remove in USA/Canada. What am I missing?
MarkPRP (22nd October, 2016)
Sprinter 906 year 2008 spare key situation.
Try to read EIS via OBD ------- KO
Read EIS via IR------------------OK
Read pwd via IR ----------------ok (after 3 attempts)
Prepare BE key-------------------KO (the key open and close the doors, work in EIS but starter doesnt work)
Prepare another BE key---------KO The second key BE the same: starter KO.
Prepared key ver.57------------OK
I dont understand is BE not able for this EIS or .....???
This is the second case, we have the same experience with 164, starter worked 1sec and stoped immediately (the BE keys by another seller)
Anybody have similar experience with BE keys ?
Try to read EIS via OBD ------- KO ....maybe you need use PIN1 of OBD plug to connect Kline there separately...as by W639
Read EIS via IR------------------OK
Read pwd via IR ----------------ok (after 3 attempts)
Prepare BE key-------------------KO (the key open and close the doors, work in EIS but starter doesnt work)
Prepare another BE key---------KO The second key BE the same: starter KO.
Prepared key ver.57------------OK
i use BE keys from my source to more then 3 pcs of W906 and success, years 2010, 2012 and 2014
maybe you not right teached the key in all ignitions positions to all ecu units
need little time wait in each ignition position i think you are only too fast to have result....
use DAS diagnostic to see all actual values about drive permission when try to teaching key to EZS
Last edited by daxxer; 22nd October, 2016 at 07:07 AM.
many thanks to friend kevfield
dikseln (22nd October, 2016), dvdpgn (30th July, 2019), jurik8 (18th March, 2017), Nassreddine84 (23rd October, 2016)
This worked for one key, thanks!
I got car running but couldn't make second key. I tried all positions.
Interesting thing is that I fixed the old key but MB tool says it is unuse. Same happened with other w203 also. So old key doesn't work after reading password from key. "Computing data, please wait" and waiting doesn't help. What am I doing wrong?
Added cables for W205 and W222,
I ask:
software for W205 will be released soon?
it seems to me that key W205 has different reading,
I did attempt to reading key chrome key W205 without success.
Anybody knows where to find such like this third party eis with key PM plz thank u this used for w221 lost keys
NO ADVERTISING PLEASE
Bookmarks